how to reset tpms honda accord 2008

How to Reset TPMS Honda Accord 2008

By Ashley Hernandez
AD

Driving a Honda Accord 2008 comes with the convenience of a Tire Pressure Monitoring System (TPMS), but like any other feature, it may require a reset due to tire changes or maintenance. Here's a step-by-step guide on how to reset the TPMS in your 2008 Honda Accord.

The process involves releasing and then re-inflating the tires to their proper pressure, and then using the car's dashboard menu to reset the system. Let's dive into the details of this process.

Preparing Your Honda Accord 2008 for TPMS Reset

Before you begin, ensure your car is parked in a safe, flat location and the engine is off. You'll need a reliable tire pressure gauge and a pump to inflate your tires.

AD
Honda ABS & VSA Dash Lights Stay On? – Easy Fault Reset Procedure.
Honda ABS & VSA Dash Lights Stay On? – Easy Fault Reset Procedure.
Honda Accord A/C Troubleshooting and Service
Honda Accord A/C Troubleshooting and Service
How to Replace Blower Motor Resistor 1994-1997 Hon
How to Replace Blower Motor Resistor 1994-1997 Hon

Check your owner's manual for the correct tire pressure for your vehicle. It's usually located on the driver's side door jamb.

Deflating and Re-inflating Tires

Using your tire pressure gauge, deflate each tire until the TPMS light turns off on your dashboard. This typically happens when the pressure drops below 20 PSI.

2008 To 2012 Honda Accord How To Change Headlight Bulbs With Part Numbers
2008 To 2012 Honda Accord How To Change Headlight Bulbs With Part Numbers
Honda Accord Cranks But Won’t Start – Possible Causes & Fixes Explained
Honda Accord Cranks But Won’t Start – Possible Causes & Fixes Explained

Next, re-inflate each tire to the specified pressure using your tire pump. Be sure to monitor the pressure closely to avoid over-inflating.

Resetting the TPMS

After you've re-inflated all tires to their correct pressure, it's time to reset the TPMS.

AD

Turn your ignition to the 'ON' position without starting the engine. Press and hold the 'SELECT' button on your dashboard until the tire pressure monitor icon appears on the display. Release the button.

Learning Mode: Reacquiring Tire Pressure Data

The next step involves putting the TPMS in 'learning mode' to reacquire tire pressure data.

While the ignition is still in the 'ON' position, press and release the 'SELECT' button three times. The tire pressure monitor icon should now be blinking, indicating that the system is in learning mode.

AD

Individual Tire Identification

Now, begin at the driver's side front tire and deflate it until the 'LOW TIRE PRESSURE' warning appears on your dashboard. This tells the system that this tire is 'Tire 1'.

Re-inflate this tire to the correct pressure. Once the warning light disappears, move to the other tires and repeat the process in the following order: Passenger front, Driver's rear, Passenger rear. Each time, wait for the warning light to disappear before moving to the next tire.

Verification of TPMS Reset

After completing the process for all four tires, turn off the ignition and wait for about 60 seconds. Then, turn the ignition back to the 'ON' position. The tire pressure monitor icon should no longer be blinking, indicating that the TPMS has been successfully reset and reacquired tire pressure data for all four tires.

AD

It's a good practice to periodically check your tire pressure and reset the TPMS as needed to ensure optimal performance and safety.

Remember, the TPMS is a crucial safety feature that alerts you to low tire pressure. Always prioritize handling any TPMS warnings promptly and safely. Happy driving in your Honda Accord 2008!

AD