how to reset tire pressure sensor subaru crosstrek

Reset Tire Pressure Sensor: Subaru Crosstrek Guide

By Ashley King
AD

Regular maintenance of your Subaru Crosstrek is crucial to ensure its optimal performance and safety. One often overlooked aspect is the tire pressure monitoring system (TPMS), which alerts you when your tires are underinflated. In this guide, we'll walk you through the process of how to reset the tire pressure sensor on your Subaru Crosstrek.

Before we begin, it's essential to understand that your Crosstrek is equipped with either direct TPMS (dTPMS) or indirect TPMS (iTPMS). The process of resetting varies slightly between the two systems, so let's dive into each one.

Resetting Direct TPMS (dTPMS)

Direct TPMS uses individual pressure sensors inside the valve stems of your tires. If you've recently replaced or rotated your tires, or adjusted the pressure, you'll need to reset the system. Here's how:

AD
How to Program a Tire Pressure Sensor
How to Program a Tire Pressure Sensor
Largest tire for stock Crosstrek?
Largest tire for stock Crosstrek?
5 Surprising Things On Your Subaru You Never Knew Existed!
5 Surprising Things On Your Subaru You Never Knew Existed!

Changing a tire or rotating wheels

After performing these operations, you need to reprogram the vehicle's computer to recognize the new or moved tires. Follow these steps:

  1. Insert and turn the ignition key to the 'ON' position without starting the engine.
  2. Press the 'TRIP' or 'RESET' button (located on the combination meter) until the tire pressure light blinks.
  3. Within five seconds, press and hold the trip/mileage reset button until the tire pressure light turns off (about 10-15 seconds).
  4. Release the button, then press it again to verify that the light has turned off.

Repeat this process a second time after the light has confirmed it's off.

three different suvs are shown in this graphic above the words, 2013 - present and 2013 - present
three different suvs are shown in this graphic above the words, 2013 - present and 2013 - present
786K views · 19K reactions | Do you know what your trailer tires are doing while you’re driving? The Tymate TM7 lets you monitor tire pressure and temperature in real time. Just screw on the sensors, plug in the mon | Outdoornia
786K views · 19K reactions | Do you know what your trailer tires are doing while you’re driving? The Tymate TM7 lets you monitor tire pressure and temperature in real time. Just screw on the sensors, plug in the mon | Outdoornia

Adjusting tire pressure

If you've recently adjusted the tire pressure, you'll need to reset the system as well. Follow these steps:

  1. Increase or decrease the tire pressure to the recommended level (found on the driver's door jamb).
  2. Insert and turn the ignition key to the 'ON' position without starting the engine.
  3. Press the 'TRIP' or 'RESET' button until the tire pressure light blinks.
  4. Press and hold the button until the light turns off, then release it.
  5. Press the button again to verify that the light has turned off.

Repeat this process a second time after the light has confirmed it's off.

AD

Resetting Indirect TPMS (iTPMS)

Indirect TPMS relies on the vehicle's anti-lock braking system (ABS) to monitor tire pressure. Here's how to reset it:

Changing a tire or rotating wheels

If you've done either of these, you'll need to teach the system the new or moved tires' position. Follow these steps with the vehicle stationary:

  1. Insert and turn the ignition key to the 'ON' position without starting the engine.
  2. Press the 'MENU' button (located on the audio system) until you see the 'Tire PressureWARNING' message on the display.
  3. Press and hold the 'SET' button until the display shows 'TIRE LEARNING' or 'TIRE MONITOR ZERO' (this may take up to 10 seconds).
  4. Follow the screen prompts to input the tire position numbers ( typically P1, P2, P3, P4), representing the front left, front right, rear left, and rear right tires.

After entering the positions, the system will reset and learn the new wheel positions.

AD

Adjusting tire pressure

If you've recently adjusted the tire pressure, follow these steps to reset the system:

  1. Increase or decrease the tire pressure to the recommended level (found on the driver's door jamb).
  2. Insert and turn the ignition key to the 'ON' position without starting the engine.
  3. Press the 'MENU' button until you see the 'Tire PressureWARNING' message on the display.
  4. Press and hold the 'SET' button until the display shows 'RELEARN TIRES'.
  5. Drive the vehicle at a speed of 15-20 mph (24-32 km/h) for at least two miles (3.2 km) to complete the relearning process.

The tire pressure light may stay on for a short period during this process before turning off.

By following these steps, you'll ensure that your Subaru Crosstrek's tire pressure monitoring system is functioning correctly, keeping you safe and informed about your tire pressure levels. Don't forget to check your tires regularly for optimal performance and longevity.

AD
AD