how to reset tire pressure sensor chevy silverado 2013

Reset Chevy Silverado 2013 TPMS: A Step-by-Step Guide

By Olivia Robinson
AD

Driving your 2013 Chevy Silverado with improperly inflated tires isn't just bad for your vehicle, it's unsafe. Tire Pressure Monitoring System (TPMS) sensors alert you when your tires are underinflated, and resetting these sensors is a crucial step after rotating or replacing tires. Here's a step-by-step guide on how to reset the tire pressure sensor on your 2013 Chevy Silverado.

Before you begin, ensure you have a accurate tire pressure gauge, your vehicle owner's manual, and a pencil and paper to keep track of your tires' inflation pressure. Let's dive into the process.

Understanding Tire Pressure Monitoring System (TPMS)

The TPMS in your 2013 Chevy Silverado uses sensors in each wheel to measure tire pressure. If a tire is underinflated by 25% or more, the TPMS warning light will illuminate on your dashboard, indicating which tire(s) need attention. Familiarizing yourself with the TPMS will help you better understand how to reset the sensors.

AD
How to Reset Chevy Tire Pressure Sensors
How to Reset Chevy Tire Pressure Sensors
How to Replace a Tire Pressure Sensor
How to Replace a Tire Pressure Sensor
How to Reset a Tire Pressure Sensor Ford
How to Reset a Tire Pressure Sensor Ford

Your Chevy Silverado is equipped with a direct TPMS, meaning each tire has its own sensor transmitting pressure data to the vehicle's central computer. This makes resetting the sensors a relatively straightforward process.

Locating the TPMS Sensor Relearn Procedure in Your Owner's Manual

Your vehicle's owner's manual contains detailed instructions on resetting the TPMS sensors, specific to your 2013 Chevy Silverado. Locate your manual and turn to the section dealing with the Tire Pressure Monitoring System. Having these instructions handy will ensure you follow the correct procedure for your vehicle.

How To Reset The A/C On Chevy Silverado
How To Reset The A/C On Chevy Silverado
a close up of a speedometer with the words how to reset tire pressure light?
a close up of a speedometer with the words how to reset tire pressure light?

Alternatively, you can refer to the digital version of your owner's manual available online, using your vehicle's Vehicle Identification Number (VIN) to access the specific model and year.

Preparing Your Vehicle for the TPMS Sensor Relearn Procedure

Before starting, make sure your 2013 Chevy Silverado is parked on a flat surface with the engine running. Ensure all tires are properly inflated to the recommended pressure found in your owner's manual or on the driver's door jamb.

AD

Gather any necessary tools and materials, such as a tire pressure gauge, a tire inflator, and a pencil and paper to record tire pressure readings.

Resetting the TPMS Sensors

With your vehicle prepared and the instructions from your owner's manual at hand, you're ready to reset the TPMS sensors. The process involves driving your Silverado at a specific speed for a certain distance and then activating the TPMS sensor relearn mode. Let's break this down into manageable steps.

Using your owner's manual as a guide, follow these general steps to reset your TPMS sensors:

AD

Step 1: Drive Your Chevy Silverado at the Required Speed and Distance

Begin driving your vehicle at the speed specified in your owner's manual, typically around 50 to 60 miles per hour. Continue driving at this speed for the required distance, usually between 10 to 15 miles. This step allows the TPMS to identify the location of each tire.

During this process, do not turn off your vehicle or exit the highway. Maintain the required speed and distance to ensure the TPMS can successfully identify and store the new tire positions.

Step 2: Activate the TPMS Sensor Relearn Mode

Once you've completed the required distance, park your vehicle in a safe location and turn off the engine. Turn the ignition back on without starting the engine. This will initiate the TPMS sensor relearn mode, allowing you to activate each tire's sensor.

AD

Using your owner's manual as a reference, follow the procedure to activate each sensor. Typically, this involves turning the ignition on and off in a specific sequence or pressing the relevant buttons on your dashboard. Be sure to follow the exact steps outlined in your manual to ensure proper activation.

With the TPMS sensor relearn procedure complete, your 2013 Chevy Silverado should now recognize the new tire positions and monitor their pressure accurately. Regularly checking and maintaining your tire pressure will help ensure the safety and longevity of your tires while keeping your TPMS warning light a distant memory.

AD