Reset Water Filter Light on Whirlpool Refrigerator
If you've noticed that the water filter light on your Whirlpool refrigerator is illuminated, it's time to change the water filter. This indicator light serves as a reminder to replace the filter every 6 months or 200 gallons of usage, whichever comes first. Resetting the light after replacing the filter is a simple process, and this guide will walk you through it step by step.
Before you begin, ensure you have the replacement filter on hand and the current filter is changed. Once you've replaced the filter, you're ready to reset the light. Here's how to do it, using a Whirlpool refrigerator with a bottom Grill-Out door:
Resetting the Water Filter Light
Resetting the water filter light on your Whirlpool refrigerator involves accessing the filter housing and turning the filter a quarter turn. Here's how to do it:
1. First, open the bottom refrigerator door. This gives you access to the water filter housing located inside the lower right corner of the door.
Locating the Filter Housing
The filter housing is a cylindrical piece that you can turn counterclockwise to release the old filter and clockwise to install the new one. It's usually marked with a 'Filter' label for easy identification.
2. Once you've located the filter housing, turn it counterclockwise to release the old filter and remove it. This step is crucial before you can reset the water filter light.
Preparing for Reset
Before resetting the light, ensure the old filter is completely removed from the housing. This prepares the filter housing to accept the new filter and allows you to reset the light accurately.
3. Now that the old filter is removed, install the new filter by aligning the arrows on the filter with the arrows on the filter housing, then turning the filter clockwise until it's secure.
Installing the New Filter
The new filter should turn easily until it stops, at which point it's fully installed. If you encounter resistance, double-check that the filter is properly aligned with the housing and try again.
4. With the new filter installed, it's time to reset the water filter light. Look for a small button near the filter housing, usually marked with a 'Reset' arrow or 'Filter' text.
Resetting the Water Filter Light
Pressing this button resets the light, indicating that the filter has been changed. Here's how to do it correctly:
Locating and Pressing the Reset Button
The reset button is usually a small, circular button that requires a firm press to activate. If you're having trouble locating it, consult your refrigerator's user manual for the exact location.
5. Once you've located the reset button, press it firmly and hold it for about 3-5 seconds. The water filter light should blink rapidly and then turn off.
Confirming the Reset
After holding the button, the light should blink rapidly to signal that the reset was successful. If the light turns off immediately or doesn't blink at all, the reset may not have been completed. In this case, try pressing and holding the button again.
Congratulations! You've successfully reset the water filter light on your Whirlpool refrigerator. Regularly replacing and resetting the filter keeps your water tasting fresh and ensures that your refrigerator's water dispenser continues to function properly.
Remember, it's crucial to reset the light after changing the filter to maintain accurate tracking of filter usage. This helps ensure that you change the filter at the right time, preventing contaminants from entering your water supply. Your Whirlpool refrigerator's water filter light is a convenient tool to help you keep your water clean and safe to drink.