how to reset the bose soundlink color 2

Reset Bose SoundLink Color 2: A Step-by-Step Guide

By Christopher Thomas
AD

Ever wondered how to breathe new life into your Bose SoundLink Color 2 speaker when it's acting up? Resetting it to factory settings can often solve various issues, from connectivity problems to audio distortions. Here's a step-by-step guide on how to achieve this in an easy and efficient manner.

Before we dive into the process, it's essential to understand that resetting your speaker will wipe out all paired devices and custom settings. So, ensure you have the necessary information for your devices and settings at hand.

Preparing for the Reset

Before proceeding with the reset, there are a few steps to prepare:

AD
BOSE Soundlink Colour II - How to Fix \
BOSE Soundlink Colour II - How to Fix \
How to Reset Bose Soundbar - Ready To DIY
How to Reset Bose Soundbar - Ready To DIY
Bose SoundLink Color Won’t Turn on – Here Is How to Reset It - Audio MAV
Bose SoundLink Color Won’t Turn on – Here Is How to Reset It - Audio MAV

1. Make sure your Bose SoundLink Color 2 speaker is turned on and charged. This ensures that the reset process isn't interrupted due to low battery.

2. Note down the Bluetooth addresses or passwords of your previously paired devices. You'll need these for reconnecting after the reset.

How to Reset Bose Soundbar 900, 700, 500, 300, The Complete Guide
How to Reset Bose Soundbar 900, 700, 500, 300, The Complete Guide
A final fix for a Bose Soundlink II Bluetooth speaker that is blinking red
A final fix for a Bose Soundlink II Bluetooth speaker that is blinking red

Understanding the Reset Button

The Bose SoundLink Color 2 has a small, circular button called the "reset button". It's located on the back of the speaker, close to where the charging port is located. You'll need a toothpick or a small pointed object to press and hold this button for the reset process.

3. Locate the reset button on your speaker. It's a small, circular indentation you can press with a pointed object like a toothpick.

AD

Disconnecting from All Devices

Before resetting, ensure that your speaker is disconnected from all devices. Here's how you can do that:

1. On your paired device, turn off the Bluetooth connection. This disconnects your speaker from that specific device.

2. To disconnect all other devices, press and hold the power/Bluetooth button on your speaker for about 10 seconds. This will turn off the speaker and disconnect it from all other paired devices.

AD

The Reset Process

Now that you're prepared, let's delve into the reset process:

1. Press and hold the reset button on your speaker for about 5 seconds. You'll feel a small click when the button is fully depressed.

2. Release the button when you hear a voice prompt saying "Bluetooth device(s) connected" or see a "Discovering" message on your speaker's battery indicator lights. This indicates that your speaker is in pairing mode.

AD

Pairing Your Devices Again

After the reset, you'll need to reconnect your devices to your speaker:

1. On your paired device, turn on the Bluetooth function.

2. Search for available Bluetooth devices. Your Bose SoundLink Color 2 should appear as "BOSEOUT Fifty". Select this to pair your device with the speaker.

3. If prompted for a password, enter "0000" (four zeros) to connect. After the connection, test the audio by playing a song.

Reconnecting All Devices

Repeat the pairing process to connect your speaker with all your previously paired devices. Once done, your Bose SoundLink Color 2 is as good as new.

Remember, your speaker will now prioritize the last device it was paired with before the reset. If you want to switch devices, simply turn off the Bluetooth connection on the active device and turn it on on the new device.

So there you have it! Your Bose SoundLink Color 2 is now reset and reconnected, ready to provide you with crystal-clear audio once again. Enjoy your music!

AD