how to reset swann camera

How to Easily Reset Your Swann Camera

By Kevin Robinson
AD

Forgetting your Swann camera's password can be frustrating, but don't worry, resetting it is a straightforward process. Whether you're planning to format your device due to a lost password, or want to Factory Reset for a clean slate, this guide will walk you through the steps.

Before proceeding, ensure you have a functional computer or smartphone with internet access and know your camera's IP address. If you don't remember the IP, you can still find it using its default password, as outlined in our guide: "How to find Swann camera IP address".

Understanding the Swann Camera Reset Process

The Swann camera reset process involves two primary methods: Hard Reset and Network Reset. Both have distinct purposes, so it's essential to choose the right one for your needs.

AD
How to reset Swann Wi-Fi camera SWWHD-PTCAM - Learn CCTV.com
How to reset Swann Wi-Fi camera SWWHD-PTCAM - Learn CCTV.com
How to reset Wisenet Cameras - Learn CCTV.com
How to reset Wisenet Cameras - Learn CCTV.com
Swann DVR Camera Compatibility Guide
Swann DVR Camera Compatibility Guide

In general, a Hard Reset is your go-to option if you've forgotten the password or want to completely Factory Reset your device. Just remember that this method will delete all your camera's settings and recordings. On the other hand, a Network Reset is useful when you're having trouble connecting your camera, and simply want to reset the network settings.

Hard Reset: Formatting Your Swann Camera

A Hard Reset, or Factory Reset, involves manually resetting each camera on your system. This process will remove all your camera's configurations, including password settings, so all cameras will revert to the default password ('1234') and default IP address.

a close up of a computer circuit board with a red circle
a close up of a computer circuit board with a red circle
Reolink Argus PT reset (step-by-step) - Learn CCTV.com
Reolink Argus PT reset (step-by-step) - Learn CCTV.com

After resetting, you'll need to reconfigure each camera using the SwannView Link software or Swann Security app. The new IP addresses will be in the default range, starting from 192.168.1.108. For detailed setup instructions, follow our guide: "How to set up Swann camera".

Network Reset: Reviving a Disconnected Camera

A Network Reset is your solution if your camera isn't responding or you're having trouble connecting. This process will not change your camera's password or settings, only the network configuration. After resetting, your camera will adopt the new network settings, allowing you to reconnect it.

AD

To perform a Network Reset, simply turn off your camera, then disconnect and reconnect it to the network, either by unplugging the Ethernet cable or turning off/on the Wi-Fi. After that, log in to the SwannView Link software or app and reconfigure the network settings.

Step-by-Step Swann Camera Hard and Network Reset

Now that you understand the difference between Hard and Network Reset, let's dive into the detailed steps for each process.

Remember, these steps assume you're resetting from the SwannView Link software on a PC. If you're using an app, the process will be similar, but the visual cues might vary.

AD

Performing a Hard or Factory Reset

Before you proceed, double-check with the remaining camera modules to see if any have survived the Hard Reset. If not, proceed with these steps:

ovisit the SwannView Link software and log in with the default password ('1234'). Select the "Settings" tab and click on the "Device Info" row for your camera.
Click on the "Advanced" tab, then select the "Restore Factory Settings" option. A pop-up window will appear, asking for confirmation. Click "Yes" to proceed.
The software will now format your camera. Do not interfere with the process or turn off your PC. Once complete, your camera will turn off and then back on, signaling the reset.
Repeat these steps for each camera in your system.

After resetting, use the SwannView Link software or app to access your cameras again. They should now be using the default password ('1234') and default IP address.

Carrying Out a Network Reset

Unplug the Ethernet cable from your camera, if connected, or turn off and on the Wi-Fi on your camera.
Visit the SwannView Link software and log in with your current password or the default password ('1234'). Select the "Settings" tab and click on the "Network" row for your camera.
Adjust the network settings (e.g., IP, Subnet Mask, Gateway, DNS) as needed. For detailed network configuration instructions, follow our guide: "How to set up Swann camera network".
Click "ok" to save the new settings. Your camera will now adopt the new network configuration and re-establish connection.

AD
  • If you're having trouble finding your camera, ensure it's turned on, and the Wi-Fi is connected. Also, double-check that you're entering the correct IP address and password in the SwannView Link software.
  • If you're still experiencing issues, try power cycling your router, modem, and cameras. Additionally, try accessing your cameras using a different device, as sometimes, the issue might be with the device you're using to access the cameras.

Resetting your Swann camera might seem daunting at first, but with the right steps and understanding of the process, you'll navigate through it seamlessly. Whether you're reviving a disconnected camera with a Network Reset or formatting your device to regain access with a Hard Reset, these guides have got you covered.

AD