how to reset subaru check engine light

How to Reset Subaru Check Engine Light

By Olivia Miller
AD

If your Subaru's check engine light has recently illuminated, it's crucial to address the issue promptly to prevent potential engine damage. While it could be something minor, it's essential to identify and rectify the problem as soon as possible. This guide will walk you through the process of diagnosing and resetting the check engine light in your Subaru vehicle.

Before we begin, it's important to note that the reset process might not delete the stored trouble codes if the issue persists. Always try to understand the cause of the light before resetting. A diagnostic tool or a trip to a professional mechanic may be required to interpret the error codes.

Identifying the Cause of the Check Engine Light

The first step is to determine why the check engine light is on. You'll need an OBD-II scanner, which can be found at auto parts stores or borrowed from some libraries. Plug the scanner into the diagnostics port under your steering column, then start the engine.

AD
Subaru Check Engine Light and Code # P0420 Explained - All Wheel Drive Auto
Subaru Check Engine Light and Code # P0420 Explained - All Wheel Drive Auto
These 5 Hidden Subaru Settings Are Ruining Your Engine Lifespan - TURN IT OFF NOW!
These 5 Hidden Subaru Settings Are Ruining Your Engine Lifespan - TURN IT OFF NOW!
How To Reset a Check Engine Light
How To Reset a Check Engine Light

The scanner will display any error codes it finds. Write these codes down for reference. Common Subaru check engine light causes include problems with the catalytic converter, oxygen sensors, mass air flow sensor, or ignition system. However, it's best to consult with a professional or use an online lookup tool to interpret the codes.

Using an OBD-II Scanner

Connect the OBD-II scanner to your Subaru's diagnostic port. Turn the ignition on, but don't start the engine. The scanner should turn on and display any stored error codes. If the light is steady, it's indicating a current problem. If it's flashing, it signals a serious issue that should be addressed immediately.

Write down any error codes displayed on the scanner. You can then look these up in an online database to get an idea of what might be wrong. However, a mechanic's interpretation is often more accurate and comprehensive.

Error Code Severity

The flashing check engine light indicates a severe problem that requires immediate attention. A steady light signals a less urgent issue but still needs to be addressed promptly. If the light flashes or stays on steadily, proceed to the next step. If it turns off after a few seconds, no error codes were detected, and there might be a problem with the scanner.

AD

In such cases, try a different scanner or visit a professional mechanic for a more accurate diagnosis.

Resetting the Check Engine Light

Once you've diagnosed and addressed the issue, it's time to reset the check engine light. Before starting, ensure the problem that caused the light to illuminate has been fixed.

Resetting the light simply clears the memory of the onboard computer. It doesn't actually fix the problem. For instance, if an engine misfire caused the light, the light will return if the misfire problem isn't resolved.

AD

Resetting with an OBD-II Scanner

After fixing the problem, plug the OBD-II scanner into the diagnostic port. Turn the ignition on but don't start the engine. The scanner will display any stored trouble codes again. If the codes are no longer there, you're ready to reset the light.

Follow the scanner's instructions to perform a 'clear codes' function. This will erase the stored trouble codes and turn off the check engine light. Some scanners may require you to press and hold a button while turning the ignition off and on again.

Resetting Without an OBD-II Scanner

If you don't have access to an OBD-II scanner, you can still reset the check engine light in your Subaru. First, address the issue that caused the light to illuminate. Then, follow these steps:

AD

1. Turn the ignition on and off five times within a 10-second interval. To do this, turn the key to the 'ON' position and then back to the 'OFF' position quickly. Repeat this five times.

2. After the fifth 'OFF' position, wait about 30-45 seconds before turning the ignition back to the 'ON' position. This should reset the check engine light. If it stays on, try the procedure again.

Remember, simply resetting the light doesn't fix the underlying problem. Always attempt to diagnose and repair the issue first. If the light returns after resetting, go back to the diagnostic and repair steps.

Regularly maintaining your Subaru can help prevent problems that might cause the check engine light to illuminate. Always consult your vehicle's owner's manual for recommended service intervals and procedures. If you're unsure about any aspect of diagnosing or repairing your vehicle, don't hesitate to consult a professional mechanic. Happy driving!"

AD