how to reset sloan automatic flush valve

Reset Sloan Flush Valve: Step-by-Step Guide

By Hannah King
AD

Ever found yourself in a public restroom, waiting for the automatic flush valve to kick in, only to realize it's stuck? Sloan automatic flush valves are reliable, but like any mechanical component, they can malfunction. Resetting these handy devices is a simple task that doesn't require professional plumbing skills. Here's a step-by-step guide on how to reset your Sloan automatic flush valve, ensuring your restroom experience is never interrupted again.

Before we dive into the reset process, it's essential to understand why these valves might stop working. Debris buildup, low battery power, or hydronic imbalance are common reasons for a Sloan flush valve not to activate. With a little DIY troubleshooting, you canIdentify the cause and fix the issue.

Examine the Flushometer

Before resetting, inspect the flushometer unit for any visible signs of damage or debris buildup. The flushometer is the mechanism that controls water flow and is usually located on the wall above the toilet.

AD
How To Rebuild A Sloan Flush Valve
How To Rebuild A Sloan Flush Valve
Fix Sloan Regal & Royal Flush Valves
Fix Sloan Regal & Royal Flush Valves
How to replace a flush valve and seal on a leaking toilet
How to replace a flush valve and seal on a leaking toilet

The main components of the flushometer are the handle (or actuator), the adjustment knob, and the flush valve body. Familiarize yourself with these parts, as they'll be crucial during the reset process.

Step 1: bowl

Start by flushing the toilet to release any water stored in the tank. Next, you'll need to remove the tank cover. Most toilet tank covers can be lifted off or unscrewed using a flathead or Phillips screwdriver.

Sloan Regal Flushometer | Installation | Repair and Replace
Sloan Regal Flushometer | Installation | Repair and Replace
How to Replace Flush Valve Seal
How to Replace Flush Valve Seal

Once you've removed the tank cover, you should see the internal mechanisms of the toilet, including the flush valve at the bottom of the tank. The flush valve, typically positioned at the lowest point of the tank, opens and closes to control the flow of water into the bowl.

Step 2: Reset theFlush Valve

To reset the flush valve, you'll need to perform a series of flushes to clear any debris or airLock from the system.

AD

Start by flushing the toilet three times in succession. Allow the water to drain completely between flushes. This process helps to dislodge any debris that may be blocking the valve, allowing it to reset.

After the third flush, wait a few minutes before flushing the toilet again. If the flush valve has reset successfully, the toilet should flush normally.

Step 3: Check the Water Supply

If the flush valve still isn't working after resetting, the issue might be with the water supply. Ensure that the shut-off valve connected to your toilet's water supply line is open. The shut-off valve is usually located behind the toilet or near the floor.

AD

To check if the shut-off valve is open, turn it clockwise, then counterclockwise. If it's open, you should feel resistance when trying to turn it further. If the valve is stuck or difficult to turn, you may need to call a plumber for assistance.

Inspect for Hydronic Imbalance

Hydronic imbalance occurs when the air and water mixture within the flushometer becomes unbalanced. This imbalance can cause the flushometer to malfunction, requiring you to reset it more frequently.

To inspect for hydronic imbalance, you'll need to bleed the flushometer to remove excess air. This process involves opening a small bleed screw located on the unit's side or bottom.

AD

Step 4: Bleed the Flushometer

Begin by turning off the water supply to the flushometer. You can find the water supply shut-off valve near the flushometer or behind the toilet.

Once the water supply is turned off, locate the bleed screw on the flushometer and remove it using an Allen wrench or a screwdriver. As you remove the screw, water and air will escape, bleeding the excess air from the system.

Step 5:why water drained from tank

After bleeding the flushometer, turn the water supply back on and allow the tank to fill. As the tank refills, you should hear water running through the flushometer.

If water isn't draining from the tank after you've flushed the toilet, there may be an issue with the flush valve mechanism itself. In this case, you'll need to replace the flush valve assembly, which involves some disassembly of the tank's internal components. If you're unsure about performing this repair, don't hesitate to consult a professional plumber.

Regularly inspecting and maintaining your Sloan automatic flush valve can help prevent malfunctions and ensure optimal performance. By following these troubleshooting and reset steps, you'll be equipped to handle most common issues and save yourself the inconvenience of calling a plumber. Now, you're ready to tackle any restroom challenge with confidence!

AD