how to reset schedule on honeywell thermostat

Reset Honeywell Thermostat Schedule: Step-by-Step Guide

By William Wilson
AD

If you're struggling with a Honeywell thermostat that's not following your programmed schedule, you're not alone. Resetting the schedule can help get it back on track. Here's a step-by-step guide on how to do it, ensuring your home stays comfortable and energy-efficient.

Before we dive into the reset process, remember that Honeywell thermostats have various models. While the steps below apply to many models, some may vary. If you're unsure about your specific model, consult the user manual or contact Honeywell's customer support.

Preparing to Reset Your Honeywell Thermostat

Before you start, make sure your thermostat is running on AA batteries. If not, replace them with fresh ones. Also, ensure your thermostat is showing your current temperature and that the clock is set accurately.

AD
Honeywell Pro Series Thermostat Not Working – How To Reset It?
Honeywell Pro Series Thermostat Not Working – How To Reset It?
How to Reset Honeywell Thermostat - Ready To DIY
How to Reset Honeywell Thermostat - Ready To DIY
Honeywell TH6320U2008 T6 Pro Programmable Thermostat User Guide
Honeywell TH6320U2008 T6 Pro Programmable Thermostat User Guide

Next, locate your thermostat's reset button. It's usually on the side or at the bottom, often labeled as 'Router' or 'System' reset. Some Honeywell thermostats may require a special tool, like a paperclip or a small screwdriver, to press the button.

Entering Recovery Mode

To initiate the reset process, you'll need to put your thermostat into Recovery Mode. Here's how:

How To Reset Honeywell Thermostat: A Guide For Every Model
How To Reset Honeywell Thermostat: A Guide For Every Model
How To Turn Off Permanent Hold On Honeywell Thermostat
How To Turn Off Permanent Hold On Honeywell Thermostat

1. Turn off the power to your HVAC system at the thermostat. This is usually done by switching the fan setting to 'Off' or 'System Off'.

2. Press and hold the reset button for about 10 seconds, then release it.

AD

3. Wait for a few seconds. If your thermostat doesn't have a screen, you should hear a double-beep sound. If it does, you'll see 'Ho' on the display, indicating Recovery Mode.

Resetting the Schedule

Now that your thermostat is in Recovery Mode, it's time to reset the schedule. Here's how:

1. Use the arrow buttons to navigate to the 'System Menu'. On most Honeywell thermostats, you'll need to press either the up or down arrow until you see 'Maint' or 'System Menu' on the display.

AD

2. Press the right arrow button to highlight and select 'Sched'. You might need to press 'Next' or 'OK' to access this option.

3. Select 'Reset' and follow the on-screen prompts to confirm the reset. The thermostat will restore its factory default settings, including the schedule.

Programming Your Honeywell Thermostat Again

With the schedule reset, it's time to program your thermostat again. Here's a quick guide to help you:

AD

1. Use the arrow buttons to navigate to the 'Programs' menu. Most Honeywell thermostats allow you to program up to four periods per day (Wake, Leave, Return, Sleep).

2. For each period, you can set the time and the corresponding temperature. Use the up and down arrows to set the time, and the left and right arrows to set the temperature. Press 'Next' or 'OK' to save and move to the next period.

Setting Your Preferred Temperature and Schedule

When programming your thermostat, remember that setting it to the desired temperature when you're home and slightly higher or lower when you're away can help you save energy. The U.S. Department of Energy recommends setting your thermostat to 68°F (20°C) when you're home and awake, and turning it back 8-10 degrees when you're away or asleep.

Here's an example of a typical schedule:

  • Wake: 7:00 AM - 68°F (20°C)
  • Leave: 8:00 AM - 75°F (24°C)
  • Return: 6:00 PM - 68°F (20°C)
  • Sleep: 11:00 PM - 65°F (18°C)

Saving Your Settings

After programming your preferred temperatures and schedule, make sure to save your settings. Most Honeywell thermostats will automatically save your settings, but some may require you to press a 'Save' or 'OK' button.

Finally, test your new schedule by comparing the current time and temperature to your programmed settings. If everything is working correctly, your Honeywell thermostat should adjust the temperature accordingly.

By following these steps, you've successfully reset and reprogrammed your Honeywell thermostat. Enjoy the comfort and energy efficiency of a well-programmed schedule. If you ever need to reset it in the future, these steps should help you get back on track. Happy saving!

AD