Reset Samsung Earbuds: A Step-by-Step Guide
Forgotten your Samsung earbuds pair very first after their initial setup? No worries! Resetting these tiny but powerful devices is a breeze. When resetting your Samsung earbuds, you're essentially telling them to forget their old memory and start fresh. Keep reading for a step-by-step guide on how to do this, designed to walk you through in the most engaging manner possible.
The process is quite straightforward and hardly takes a minute. It's perfect for troubleshooting connectivity issues, updating firmware, or starting over on a new device. Samsung has made it easily accessible, even for tech novices. Let's dive right in!
First Things First: Preparing for Reset
Before we begin, ensure that your earbuds are charged. While the reset process itself shouldn't deplete your battery, it's a good idea to start with a full charge. Also, make sure your mobile device, whether it's an Android or iPhone, is close by for pairing immediately after the reset.
If you're using an Android device, make sure you have the latest version of the Samsung Wearable app installed. For Apple iPhone users, if your earbuds are the agnostic Galaxy Buds+, ensure that they're connected to your iOS device via Bluetooth and have the Galaxy Buds+ app installed.
Powering Off Your Samsung Earbuds
The first step in resetting your Samsung earbuds is to power them off. This is not as simple as just putting them back into their case. Follow these steps:
For Galaxy Buds and higher models: Place your Galaxy Buds in their charging case and close the lid. Wait for around 30 seconds before opening the case again. If the earbuds are still powered on, press and hold the button on the outside of the case for about seven seconds until the charging light turns off.
For Galaxy Buds+: With the earbuds in your ears, simultaneously press and hold the touchpad on both earbuds for at least ten seconds. The notification LED on both earbuds will flash white once, indicating that they have been powered off.
Turning Off Bluetooth
Next, disconnect your earbuds from your mobile device's Bluetooth settings. This step is crucial as it ensures that your phone won't auto-connect to the earbuds after the reset. Here's how you can do it:
For Android: Go to your device's Bluetooth settings, find your Samsung earbuds, tap on the gear icon, and select 'Forget device'.
For iPhone: Head to your Bluetooth settings, tap the 'i' icon next to your earbuds, and select 'Forget this device'.
Resetting Your Samsung Earbuds
Now that your earbuds are powered off and the Bluetooth connection is severed, we can proceed with the reset. The reset process differs slightly depending on your specific model of Samsung earbuds:
Galaxy Buds (2019), Galaxy Buds+ (2020), and Galaxy Buds Pro (2021): Remove the earbuds from their case, press and hold the button on the exterior of the case for about seven seconds until the LED light turns white. Release the button, and the earbuds should beep twice, signifying they've been reset.
Galaxy Buds Live (2020) and Galaxy Buds2 (2021): Since these models don't have a case button, you'll need to use the wearable app. Open the Samsung Wearable app on your phone, go to the earbuds settings, then select 'About Earbuds'. Tap the 'Reset' option and confirm by tapping 'Reset' again when asked.
Re-pairing with Your Mobile Device
After a successful reset, re-pair your Samsung earbuds with your mobile device. This tells the earbuds to start afresh with a new device:
For Galaxy Buds (2019), Galaxy Buds+, Galaxy Buds Pro, Galaxy Buds Live, and Galaxy Buds2: Place your earbuds back in their respective charging cases, close the lid, and open it again. After around 30 seconds, the earbuds should be in pairing mode and ready to connect to your device's Bluetooth settings.
For Android: In your device's Bluetooth settings, look for your Samsung earbuds and tap 'Pair'.
For iPhone: In your device's Bluetooth settings, look for your Samsung earbuds and tap 'Connect'.
Once the earbuds are re-paired with your device, you can update them to the latest firmware via the Samsung Wearable app or the Galaxy Buds+ app, respectively.
Updating Your Samsung Earbuds
After a reset, it's always a good idea to update your earbuds to the latest firmware. This ensures you have all the latest features, bug fixes, and performance improvements. Here's how you can do it:
For Samsung Wearable app: Open the app, tap the 'update' notification at the bottom of the screen, and follow the on-screen instructions to update your earbuds.
For Galaxy Buds+ app: Open the app, tap the 'More' tab at the bottom right, then select 'About Earbuds'. Tap 'Update' and follow the on-screen prompts to update your earbuds.
And there you have it! You've successfully reset your Samsung earbuds, troubleshooting any connectivity issues and giving your earbuds a clean slate. Now, go enjoy your immersive audio experience without any interruptions. Happy-listening!