Reset KitchenAid Refrigerator Filter: Step-by-Step Guide
Do you have a Kitchenaid refrigerator that's providing less-than-optimal performance? Often, the problem could be as simple as a clogged filter. Your refrigerator has a filter designed to remove contaminants and improve the quality of water dispensed. Resetting and replacing the filter is a vital part of maintaining your refrigerator's efficiency and performance. Here, we'll guide you through a step-by-step process of how to reset and replace the filter on your Kitchenaid refrigerator.
First, let's understand the importance of resetting and replacing the filter. Resetting the filter helps reset the filter change counter, ensuring you're aware when it's time to replace it. Replacing the filter at the recommended intervals (usually every six months) helps maintain the quality and safety of your drinking water.
Resetting the Filter
Resetting the filter is a simple process that involves the following steps:
Accessing the Control Panel
Start by accessing the control panel of your refrigerator. This is typically located in the lower right corner of your refrigerator's fresh food compartment.
Your Kitchenaid refrigerator's control panel should have a 'Filter' or 'Water Filter' button. Press and hold this button for about three seconds to access the filter reset screen.
Resetting the Filter Change Interval
Once you've accessed the filter reset screen, you'll see a display indicating the remaining life of the filter. To reset this, press and hold the 'Light' or 'Auto' button until the word 'Reset' appears on the screen.
Then, release the button and press it again to confirm the reset. You should hear a beep, indicating that the reset was successful. The filter change indicator will now read 'Replace Filter' or 'Filter needs replacement'.
Replacing the Filter
Replacing the filter is also a straightforward process. Here's what you need to do:
Locating the Filter Housing
The filter housing is typically found on the top-right corner of the fresh food compartment, behind the upper-right access panel. This panel is usually labeled 'Filter'.
Using your thumb, press the lever at the bottom of the panel to release the access panel. This panel should then swing open, revealing the filter housing.
Removing the Old Filter and Installing the New One
Before you begin, make sure the refrigerator is off. Then, locate the plastic tab on the side of the filter. Twist the tab counterclockwise to loosen the old filter. Once the tab is loose, pull the filter straight out to remove it.
To install the new filter, align the filter with the arrows on the housing, pointing upward. Then, gently push the filter into the housing until it clicks into place. Make sure the plastic tab is facing down. Reattach the access panel and turn the refrigerator back on.
Remember, it's crucial to replace your Kitchenaid refrigerator filter every six months. This ensures that your water remains fresh and free from impurities. Regular replacement also helps prevent damage to your refrigerator's water dispenser and icemaker. If you're unsure about the process or have any other questions about your Kitchenaid refrigerator, don't hesitate to contact a professional for assistance.