how to reset pressure switch on furnace

Reset Furnace Pressure Switch: A Simple Step-by-Step Guide

By James Thomas
AD

Having trouble with your furnace? A tripped pressure switch might be the culprit. Resetting it can often resolve the issue, saving you the cost of a service call. Here's a step-by-step guide to help you reset the pressure switch on your furnace safely and efficiently.

Before you begin, ensure you've turned off the power to your furnace at the circuit breaker to prevent any electrical shocks. Also, locate your furnace's pressure switch, typically a thin metal tube connected to the furnace with a wire going to it. Now, let's dive into the process.

Understanding Your Furnace's Pressure Switch

The pressure switch in your furnace is a safety device that ensures your system isn't operating under too much or too little pressure. When the pressure gets too high, it trips, shutting off the furnace to prevent damage. Resetting it simply puts it back into its normal operating state.

AD
What Does a Furnace Pressure Switch Do?
What Does a Furnace Pressure Switch Do?
How to Reset a Furnace | Where Is the Reset Button On a Furnace?
How to Reset a Furnace | Where Is the Reset Button On a Furnace?
Furnace Limit Switch Troubleshooting [In 10 Easy Steps]
Furnace Limit Switch Troubleshooting [In 10 Easy Steps]

Most furnace pressure switches have a red indicator light that illuminates when the switch is tripped. If your furnace isn't running and the light is on, it's likely tripped and needs to be reset.

The Trip and Reset Process

Resetting a furnace pressure switch involves releasing the pressure, allowing the switch to reset, and then repressurizing it gently.

How To Test a Gas Furnace Pressure Switch – HowTo HVAC
How To Test a Gas Furnace Pressure Switch – HowTo HVAC
How to Test Pressure Switch on Furnace
How to Test Pressure Switch on Furnace

First, locate the access panel on the side of your furnace. Remove it to expose the blower motor and the pressure switch. The switch itself is usually a small metal cylinder with a wire connected to it and a Schrader valve (similar to a car tire valve) on the side.

Releasing the Pressure

To release the pressure, you'll need a Schrader valve tool or an ordinary screwdriver. Press the tip of the tool or the flat head of the screwdriver onto the Schrader valve to release the pressure. You should hear a hissing sound. Continue pressing until the hissing stops.

AD

Once the pressure is released, the reset button on the switch should pop back out. If it doesn't, you may need to gently press it with your finger. Be careful, as the switch and pipe may still be under some pressure.

Differentiating Between Types of Pressure Switches

Furnace pressure switches come in two main types: mechanical and electronic. While the reset process is similar for both, there's a slight difference in the way they behave when tripped.

Mechanical Switches have a button that pops out when the switch is tripped. They're easier to reset manually but may require periodic recalibration.

AD

Electronic Switches don't have a manual reset button. They automatically reset once the pressure returns to normal. However, if your furnace isn't functioning properly, the switch might be faulty and need replacing.

If resetting the pressure switch doesn't get your furnace running again, it's time to call a professional. The issue could be elsewhere, such as a clogged or leaky air duct, a faulty inducer fan, or a problem with the blower motor. Safety first, always!

Stay warm, stay safe, and happy resets!

AD
AD