How to Reset Oil Light on 2017 Honda Civic
Got a pesky oil light on in your 2017 Honda Civic? Don't let it worry you. Resetting the oil warning light is a simple process and doesn't require a professional mechanic. Let's dive into how you can do it yourself.
Before we start, remember that this light comes on when your oil level is critically low or your oil pressure is below normal. So, if your oil level is full and at the correct level (check your owner's manual for the exact spots), the issue might be low oil pressure. In this case, you'll need topping up or changing your oil entirely.
Prepared Your Honda Civic
To ensure safety and accuracy, certain preparations are necessary. Here's what you need to do before proceeding with the reset:
Park your vehicle on a level surface and let the engine run for about 10-15 minutes. This allows the oil to heat up and the oil light to reset when you turn the ignition off.
Locate the Oil Reset Button
Using a level surface is crucial because the oil reset button is in the driver's footwell, near the brake pedal. Find a small, round button, often marked or labeled with the word 'Oil'.
Do not confuse this with the Acc-button next to it, as it doesn't control the oil light. Always double-check to avoid any confusion.
Turn Your Engine Off
After the specified time, turn your engine off. You'll notice the oil light go off, signaling a successful oil reset. However, we're not done yet. The system might still show the light the next time you start your car.
Don't worry, this isn't a malfunction. The system needs further clarification that the oil issue is resolved.
Resetting the Oil Warning Light after Starting the Engine
After turning your engine off and letting it sit for a few minutes, it's time to reset the oil light memory system.
Restart the Engine
Insert your key into the ignition and turn it to the 'ON' position, but don't start the car yet. This activates the dashboard display.
Upon activation, the oil warning light may appear briefly. After a few seconds, it should disappear, indicating that system memory has been cleared.
Check the Oil Reset Process
Now, turn the ignition back to the 'OFF' position, then back to the 'ON' position again. The oil light shouldn't appear this time, signaling a successful reset.
Follow up by starting your engine. Give it about 10 seconds to warm up, then check the oil level and pressure using your dipstick. If everything checks out, your oil reset is complete.
Regularly maintaining your Honda Civic's oil level and pressure keeps the light from coming on again. If it does, revisit the resetting process, but if it still persists, consider professional diagnostic services. Happy driving!