how to reset nissan rogue radio

How to Reset Nissan Rogue Radio: A Step-by-Step Guide

By Olivia Lee
AD

Ever found yourself in a situation where your Nissan Rogue's radio won't turn on, or it's displaying odd messages? Don't worry, you're not alone. Sometimes, the simplest solution can resolve these issues - a radio reset. This process, also known as a system reset, can help troubleshoot several problems and get your infotainment system back to normal. Let's dive into how to reset your Nissan Rogue's radio, simplifying the process into easy-to-follow steps.

Before you begin, remember that resetting your radio will erase any custom settings and may require you to re-enter your Bluetooth pairing information. It's always a good idea to have this information on hand to facilitate the process.

Understanding the Reset Process

The reset process involves cutting off the vehicle's electrical power to the radio system, effectively resetting it. It might seem counterintuitive, but this simple action can resolve a variety of issues. Now, let's discuss the reset process in detail.

AD
Nissan Rogue How To Change Time On Clock - Adjust Date Hours & Minutes 2014 To 2020 2nd Generation
Nissan Rogue How To Change Time On Clock - Adjust Date Hours & Minutes 2014 To 2020 2nd Generation
Nissan Rogue 2015 Radio Android Mxtron MXN-01
Nissan Rogue 2015 Radio Android Mxtron MXN-01
Nissan Rogue Transmission Problems: CVT Issues, Fixes & Recall Updates (2025 Guide)
Nissan Rogue Transmission Problems: CVT Issues, Fixes & Recall Updates (2025 Guide)

Depending on your Nissan Rogue's model year, the process can slightly vary. We'll cover the most common methods used in recent models.

Using the Ignition Switch (For Rogues circa 2014-2019)

The following steps apply to Nissan Rogues from the 2014 model year up to 2019. If your vehicle falls within this range, follow these steps:

How to Remove Radio / CD Changer / Navigation from 2005 Nissan Maxima for Repair
How to Remove Radio / CD Changer / Navigation from 2005 Nissan Maxima for Repair
  1. Turn the ignition switch to the 'LOCK' position using the key or the push-start button, depending on your vehicle's configuration.
  2. Press and hold the 'POWER/VOL' button on the radio face for about 10 seconds, then release.
  3. Now, turn the ignition switch to the 'ON' position and wait for about 15-20 seconds.
  4. Finally, turn the ignition switch to the 'LOCK' position again, then turn it back to the 'ON' position. Your radio should now reset and reboot.

Using the Reset Button (For Rogues 2020 and onwards)

For Nissan Rogues produced since 2020, the process is slightly different due to the introduction of the dedicated reset button. Follow these steps for your newer vehicle:

  1. Locate the reset button on the right side of the navigation screen (for vehicles equipped with navigation) or the audio control panel (for non-navigation vehicles).
  2. Press and hold the reset button for about 10 seconds, then release.
  3. Wait for about 15-20 seconds for the radio to reboot. Your radio should now reset and display the default settings.

Post-Reset: Reinstating Custom Settings

Once your radio has successfully reset, it's time to reinstate your custom settings and pairing information. We'll guide you through the process step by step.

AD

Before you proceed, ensure that your Bluetooth-enabled devices are within range and properly charged. Also, keep your USB devices ready for reconnection.

Reconnecting Bluetooth Devices

After the reset, you'll need to re-pair your Bluetooth devices with your Nissan Rogue's infotainment system. To do this, follow these steps:

  1. Press the 'TEL' button on your steering wheel controls to activate the phone function.
  2. Navigate to the 'Pairs/BT' menu using the audio controls or the touchscreen (depending on your vehicle's configuration).
  3. Select 'Add Device' and follow the prompts to initiate the pairing process on your connected device.
  4. Once paired, you can verify the connection and reconnect your headset or other Bluetooth devices.

Reinstating USB Connections

If you used a USB device to play music or navigate using your Nissan Rogue's infotainment system, you'll need to reconnect it after the reset. Here's how:

AD
  1. Connect your USB device to the USB port located in the center console.
  2. Wait for a few seconds for the system to recognize the device.
  3. Once recognized, you can access your media files and use your USB device as normal.

And there you have it! You've successfully reset and reinstated your Nissan Rogue's radio settings. If you encounter any further issues, don't hesitate to consult your vehicle's Owner's Manual or contact a professional technician for assistance. Happy driving!

AD