how to reset kidde carbon monoxide detector

Easy Steps to Reset Your Kidde Carbon Monoxide Detector

By Joshua Young
AD

Waking up to the shrill, high-pitched sound of your Kidde carbon monoxide detector in the middle of the night can be startling, but it's also a reminder that you're investing in your family's safety. However, false alarms or regular check-ups might require you to reset your device. Here's how to reset your Kidde carbon monoxide detector, ensuring it's ready to protect you and your loved ones when needed.

Firstly, it's crucial to understand that Kidde carbon monoxide detectors come in several types, including electrical, battery-powered, and hardwired models. This guide will cover the reset process for the most common units, but remember that slight differences might occur depending on your device's specific model.

Before You Start: Importance and Safety

Before proceeding with the reset process, ensure that this is the correct course of action. If your Kidde carbon monoxide detector is alarming due to a carbon monoxide leak, never attempt to reset it. Instead, immediately evacuate the premises, call emergency services, and have your detector professionally inspected once it's safe to do so.

AD
How To Reset A Kidde Carbon Monoxide Detector – Storables
How To Reset A Kidde Carbon Monoxide Detector – Storables
Carbon Monoxide Detector Placement: A Helpful Illustrated Guide - DailyHomeSafety
Carbon Monoxide Detector Placement: A Helpful Illustrated Guide - DailyHomeSafety
Carbon Monoxide Detectors
Carbon Monoxide Detectors

Similarly, if your detector has been exposed to smoke or other contaminants, it should be cleaned or replaced, not reset. Only attempt to reset your Kidde carbon monoxide detector if you're certain that it's false alarming or requires a routine check-up.

Preparing to Reset: Gathering Necessary Tools

To reset your Kidde carbon monoxide detector, you'll need minimal tools on hand:

How to replace Kidde Combo (Carbon Mono-oxide & Smoke) Detector Battery
How to replace Kidde Combo (Carbon Mono-oxide & Smoke) Detector Battery
How To Reset An ADT Carbon Monoxide Detector – Storables
How To Reset An ADT Carbon Monoxide Detector – Storables
  • A ladder, if your detector is mounted high on the wall
  • A flathead or Phillips screwdriver, depending on your detector's model
  • Patience and careful attention

Having these tools ready will ensure a smooth and safe reset process.

Locating the Test/Silence Button

Kidde carbon monoxide detectors typically have a Test/Silence button located near their control panel. This button allows you to perform a test of your device's functionality and silence false alarms. To access this button, you may need to unscrew the casing from the detector, depending on your model.

AD

For example, on Kidde's KN-COSM-BA model, you'll find the button behind a protective cover that you can unscrew using a flathead screwdriver. Once you've located the Test/Silence button, you're ready to proceed with the reset process.

Resetting Your Kidde Carbon Monoxide Detector

Now that you've prepared and located the necessary components, it's time to reset your Kidde carbon monoxide detector. Follow these steps carefully to ensure a successful reset:

Electrical and Battery-Powered Models

If your Kidde carbon monoxide detector is either electrical or battery-powered, follow these steps to reset it:

AD
  1. Press and hold the Test/Silence button for approximately 15-20 seconds, until the alarm stops.
  2. Release the button and wait for the detector to reset. You'll know it's working properly when you hear any chirps or beeps indicating its readiness.
  3. Test your detector by pressing and briefly holding the Test/Silence button. If it chirps or beeps, your detector has been successfully reset.

If your electrical model failed to reset using these steps, try unplugging it from the power source for about 10 minutes before plugging it back in and trying the process again.

Hardwired Models

For hardwired Kidde carbon monoxide detectors, the reset process is slightly more involved but still manageable:

  1. Locate the push-tab bases at the bottom of your detector. You'll need to press and hold these bases for approximately 20-25 seconds until the alarm stops.
  2. Release the push-tab bases and wait for the detector to reset. You should hear chirps or beeps indicating its readiness.
  3. Test your detector by pressing and briefly holding one of the push-tab bases. If it chirps or beeps, your detector has been successfully reset.

If your hardwired model failed to reset using these steps, try temporarily removing it from the wiring and reapplying power after 10 minutes before attempting the process again.

AD

Regular maintenance and testing of your Kidde carbon monoxide detector ensure that it's in optimal working condition, providing the peace of mind you deserve. However, should you encounter persistent issues or have any further questions, don't hesitate to contact Kidde's customer support for assistance.

Now that you've learned how to reset your Kidde carbon monoxide detector, take a proactive approach to your family's safety. Schedule regular inspections, test your detectors monthly, and always keep replacement batteries on hand. It's our hope that armed with this knowledge, you'll sleep easier knowing your Kidde carbon monoxide detector is vigilantly protecting you and your loved ones.

AD