Reset Keurig Duo: Easy Descaling Guide
If your Keurig Duo Plus has been through a few rounds of brewing and fabulous coffee moments, you might start noticing a decrease in performance. This could indicate a buildup of mineral deposits and coffee residue, which is when it's time to reset your machine. Descaling, an integral part of Keurig machine maintenance, helps revive your brewer to its optimal functionality. But let's face it, it's not the most exciting task. Fear not, for today, we're going to simplify your life by guiding you through a step-by-step process on how to reset your Keurig Duo Plus after descaling.
Before we dive in, let's address a common concern. Does resetting your Keurig machine clear its memory? The answer is yes, but it's not the main goal here. Resetting is part of the descaling process, and it helps your brewer 'forget' any previous errors or data. Now, let's break down the process into a easy-to-follow guide.
Preparing for Descaling
Before we embark on our resetting journey, we need to understand the importance of descaling. Descaling removes built-up calcium and coffee residue, preventing potential damage to your brewer. For the most effective results, we recommend using Keurig's Descaling Solution, particularly for Keurig Duo Plus. It's designed to penetrate and tackle the mineral deposits effectively.
Now, let's prepare your brewer for the descaling process. You'll need:
- Keurig Descaling Solution
- Fresh Water
- Soft cloth or sponge
Appliances & Settings Check
First, ensure your Keurig Duo Plus is placed on a level surface. Check that your brewer isn't near an edge or on an unstable platform. Next, verify that the water tank has a tight seal and is securely positioned on the brewer.
Before starting, make sure your brewer is on the 'Brew' setting. If it's not, press the 'Cancel' button to pause to allow you to adjust the settings.
Fresh Water for Descaling
Empty the removable Reservoir, then fill it with 40 ounces (about 1.2 liters) of fresh water. Be sure to use cold water to avoid any unpleasant surprises from hot water. After filling, replace the Reservoir at the rear of your Keurig Duo Plus.
Now, let's measure out the descaling solution. You'll need 24 fluid ounces (approximately 700 ml). Pour this directly into the fresh water in the Reservoir. Don't worry if the mixture is not fully combined. The descaling process will handle that.
Descaling & Rinse
The descaling process is straightforward and involves running multiple brew cycles. Remember, it's crucial to follow the steps in order to avoid any potential damage to your brewer.
Brewing Descaling Solution
Press the Brew button on your Keurig Duo Plus. Keep in mind that this initial brew might take several minutes since it's working with a large volume of water.
When the first brew cycle is complete, remove the drip tray, and discard the descaled water from it. Place the drip tray back into position. Then, repeat this process two more times, for a total of three brew cycles with the descaling solution.
Rinsing Your Brewer
After the third brew cycle, empty and rinse the Reservoir. Fill it with fresh water, then discard this water to remove any remaining descaling solution from the Reservoir.
Next, run five to seven complete brew cycles with fresh water only. This rinse process helps to remove any remaining descaling solution from the brewer and its water reservoir.
Resetting Your Keurig Duo Plus
Now that your brewer has been descaled and rinsed, it's time to reset it. Resetting your Keurig Duo Plus helps to clear its memory and allows it to function optimally.
Turning Off Your Brewer
First, turn off your Keurig Duo Plus and unplug it from the power source. Let it cool down for about 30 seconds. This step helps prevent any electrical shocks.
Once your brewer is cool, carefully remove the Reservoir from the brewer.
Resetting the Brewer
After your brewer has cooled down and you've removed the Reservoir, press and hold the "Brew" button for five seconds. After releasing the button, wait about 15 seconds.
Finally, replace the Reservoir, making sure it's securely in position. Turn your Keurig Duo Plus on and wait for it to brew a cleansing cycle. Once the cycle is complete, your Keurig Duo Plus should be reset and ready to brew.
Your Keurig Duo Plus should now be revitalized and ready to brew your favorite coffee or tea. Remember, it's essential to descale your brewer every three to six months, depending on your water quality and usage. Keep this maintenance up, and your brewer will continue to serve you perfectly! Happy brewing!