how to reset honda fit oil life

Reset Honda Fit Oil Life: A Step-by-Step Guide

By Sarah King
AD

uved to reset your Honda Fit's oil life monitor can seem a bit daunting, but with the right steps, it's a task you can easily accomplish at home. This guide will walk you through the process, ensuring your vehicle's system is reset correctly and efficiently. Let's dive in!

The oil life monitor in your Honda Fit is designed to track your vehicle's oil condition and replacement intervals. Over time, this system indicates when it's time for an oil change. To reset it after changing your oil, follow these simple steps:

Preparation

Before starting, ensure you have the following: a fully charged vehicle, a clean oil filter, the correct oil type and quantity (as specified in your owner's manual), and about 30 minutes to complete the process.

AD
How to Reset Oil Light: Honda Fit 2009, 2010, 2011, 2012, 2013
How to Reset Oil Light: Honda Fit 2009, 2010, 2011, 2012, 2013
a man is driving his car and pointing at the speedometer
a man is driving his car and pointing at the speedometer
Honda fit Oil light Reset
Honda fit Oil light Reset

Additionally, it's crucial to work in a safe, well-lit environment, preferably on a level surface, and always remember to allow your vehicle to cool down before performing any maintenance tasks.

Accessing the Reset Button

Your Honda Fit's oil life monitor reset button is located underneath the driver's side dashboard. To access it, you'll need to remove a small panel. Start by locating the small, silver knock-off on the lower left side of the dashboard, just below the steering wheel. Using a flat-head screwdriver, carefully pry it off and set it aside.

Reset Oil Life- Honda Fit
Reset Oil Life- Honda Fit
How to Reset Oil Life on Honda Pilot: A Step-by-Step Guide - Ran When Parked
How to Reset Oil Life on Honda Pilot: A Step-by-Step Guide - Ran When Parked

You should now see a small, rectangular panel with a small hole in the middle. Gently pop this panel off using your fingers or a small, flat object. Tuck it away in a secure spot, as you'll need to replace it later.

Resetting the Oil Life Monitor

With the panel removed, you'll see the oil life monitor reset button. It's a small, circular button with a hole through the middle. Insert a thin, small-diameter object, like a straightened paperclip or an unfolded bobby pin, through the hole.

AD

Press and hold the button with your object for about five seconds. You should see the oil life monitor indicator lights on your dashboard go through a series of changes – this indicates the reset process has begun. If the lights don't change, try wiggling the object ever so slightly to ensure proper contact with the button.

Resetting the Trip Computer

Your Honda Fit's trip computer needs to be reset as well, as it keeps track of driving data related to the oil life monitor. Resetting the trip computer is a straightforward process that involves turning the ignition switch on and off repeatedly.

First, ensure your trip computer display shows the average fuel consumption. If it doesn't, press the reset button on the turn signal lever to change the display.

AD

Resetting the Trip Computer Display

Now, turn the ignition switch to the "LOCK" position and wait for about 20-30 seconds. This will clear the trip computer's memory and reset the display. After the waiting period, turn the ignition switch back to the "ON" position. The trip computer display should now show "--.--- miles."

If the display shows any other information, press the reset button on the turn signal lever to change the display and try the process again.

With the oil life monitor and trip computer reset, your Honda Fit is ready for a new oil life cycle. Don't forget to replace the under-dashboard panel and the knock-off in their original positions. By following these steps, you've successfully reset your vehicle's oil life monitor at home, saving time and money. Safe driving!

AD
AD