how to reset ford explorer

Reset Ford Explorer: Step-by-Step Guide

By Andrew Davis
AD

Are you facing issues with your Ford Explorer and it's time for a fresh start? Resetting your vehicle can sometimes solve persistent problems. Here's a comprehensive guide on how to safely and effectively reset your Ford Explorer.

Before we dive into the process, remember that resetting your Ford Explorer will not fix all issues. It's best for troubleshooting software-related problems, not hardware ones. If your 'Check Engine' light persists after a reset, it might be time to visit a professional mechanic.

Preparing for the Reset

Before you begin, ensure your Ford Explorer is parked in a safe location, away from traffic, and the engine is cool to prevent any potential accidents or burns.

AD
HOW TO RESET FORD TPMS LIGHT
HOW TO RESET FORD TPMS LIGHT
Troubleshooting Ford Explorer Charging Issues
Troubleshooting Ford Explorer Charging Issues
How to Reset the Oil Life on a 2013 Ford Explorer
How to Reset the Oil Life on a 2013 Ford Explorer

Next, gather any relevant information about your vehicle. This could include your Vehicle Identification Number (VIN), mileage, and any specific error codes you're attempting to clear.

Gather Necessary Information

Locate your VIN, usually found on the driver's side door jamb or the dashboard near the windshield. Having this number can help you access specific owner's manual information or troubleshooting guides online.

How to Reset the Oil Life on a Ford Explorer
How to Reset the Oil Life on a Ford Explorer
Ford Liftgate/Trunk Module Reset Tips
Ford Liftgate/Trunk Module Reset Tips

Also, note down your mileage and any error codes displayed on your dashboard. Some common error codes include P0442 (Evaporative Emission Control System Leak Detected (Small Leak)), or P0171 (System Too Lean (Bank 1)).

Understand Reset Limitations

As mentioned earlier, resetting your Ford Explorer will clear error codes and temporarily reset settings like radio presets and seat positions. However, it won't fix mechanical issues, sensor problems, or other serious malfunctions.

AD

If you're unsure about the cause of your issues, consult your owner's manual or contact a certified Ford technician before proceeding.

Resetting Your Ford Explorer

Now that you're prepared, let's begin the resetting process. The following steps apply to most Ford Explorer models. If your model is slightly different, consult your owner's manual for specific instructions.

However, the general process should involve turning off your vehicle, disconnecting the negative battery terminal, waiting for a few minutes, then reconnecting and turning your Ford Explorer back on.

AD

Step 1: Turn Off Your Vehicle

Start by placing your Ford Explorer in 'Park' and apply the parking brake. Turn off the ignition and remove the key.

If there's an error message on your dashboard, note it down. You'll want to check if it reappears after the reset.

Step 2: Disconnect the Negative Battery Terminal

Locate your vehicle's battery, usually found under the hood. The negative terminal is marked with a '-' symbol or a black cable.

AD

Using a wrench, slowly loosen the nut holding the negative cable in place. Once loose, remove the cable and set it aside. Ensure you don't touch both terminals simultaneously to avoid short-circuiting.

Step 3: Wait a Few Minutes

After disconnecting the negative terminal, wait for a few minutes (around 15 to 30 minutes) to allow your vehicle's electrical systems to fully shut down.

This step helps to clear any saved data and error codes from your Ford Explorer's memory.

Step 4: Reconnect the Battery

After waiting, carefully reconnect the negative battery terminal first, ensuring it's secure and correctly positioned.

Then, reattach the positive terminal ('+') and tighten the nut firmly to secure it.

Step 5: Turn On Your Vehicle

Now, wait a few moments before trying to start your Ford Explorer. The process allows your vehicle's computer systems to reboot fully.

Once ready, turn the ignition to the 'On' position. Your radio, clock, and other settings will need to be reset. Then, turn the ignition to 'Start' and your Ford Explorer should come to life.

Congratulations! You've successfully reset your Ford Explorer. Check if any previous error codes have reappeared. If not, enjoy your smooth-driving vehicle. If the problem persists, consider visiting a professional for further diagnosis and repair.

AD