how to reset d link router

Reset D-Link Router: A Step-by-Step Guide

By Sarah Moore
AD

If you've been experiencing connectivity issues or wish to restore your D-Link router to its factory default settings, you might need to reset it. Whether you want to change your network name (SSID) or password, or you've forgotten your admin password, performing a factory reset can be a solution. Let's delve into the process of resetting your D-Link router in a step-by-step guide.

Before we proceed, it's crucial to understand the two types of resets: a soft reset and a hard reset. A soft reset merely reboots the router temporarily, while a hard reset reverts the router to its factory default settings. We'll cover both methods in this guide.

Preparing for the Reset

Before you start, ensure that you backup any crucial settings, such as static IP addresses or port forwarding rules, as these will be deleted in the reset process. Also, make sure you have your router's admin password if you know it, as you might need it for the soft reset.

AD
How to set up DIR-615 Wireless N Router
How to set up DIR-615 Wireless N Router
How to reset router - The Tech Edvocate
How to reset router - The Tech Edvocate
How to Reset a WiFi Router - Ready To DIY
How to Reset a WiFi Router - Ready To DIY

Now, let's dive into the two reset methods.

Soft Reset (Recommended)

A soft reset is typically performed to troubleshoot minor networking issues or to reboot the router without losing your custom settings. Here's how to do it:

Router Restart vs Router Reset: What’s the Difference?
Router Restart vs Router Reset: What’s the Difference?
How to use old D-Link router as Wi-Fi extender
How to use old D-Link router as Wi-Fi extender

Automatic Soft Reset

The easiest way to soft reset your D-Link router is by using the router's admin interface. Here's how:

  1. Open a web browser and navigate to the router's IP address. Typically, this is 192.168.0.1, 192.168.1.1, or 192.168.1.100.
  2. Log in with your admin password. If you've forgotten your password, look for a label on the router that might display it, or perform a hard reset.
  3. Once logged in, go to the 'Management' or 'Admin' tab, usually at the bottom of the page.
  4. Click on 'Reboot'. The router will reboot, and you should see a message indicating that it's working.

After the reboot, check whether your networking issues have been resolved. If not, or if you need to revert your router's settings, proceed to the hard reset method.

AD

Manual Soft Reset

If the automatic method doesn't work, you can manually soft reset your router by pressing and holding the WPS (Wi-Fi Protected Setup) button on the router for about 5-10 seconds, until the power LED starts blinking.

The router should reboot, and you can check if your network issue is resolved. If not, or if you want to restore factory default settings, continue to the hard reset method.

Hard Reset (Factory Reset)

A hard reset, or factory reset, erases all custom settings, including your login credentials, saving preferences, and network configuration, and reverts the router to its factory default state. Proceed with caution and only do this if you're sure you want to erase all custom settings.

AD

Using the Reset Button

The most common way to perform a hard reset involves using the reset button located on the router. Here's how:

  1. Locate the reset button on your D-Link router. It's usually a small hole, which means you'll need a paperclip to press it.
  2. With the router powered on, press and hold the reset button for about 10-15 seconds.
  3. Release the reset button. The router will reboot, and all your custom settings will be deleted.

Upon rebooting, your router's default IP address, username, and password should be restored. You can now log in and configure your router's settings as desired.

Using the Web Interface

Alternatively, you can perform a hard reset using the router's web interface. Here's how:

AD
  1. Access the router's web interface as described in the soft reset section.
  2. Navigate to the 'Management' or 'Admin' tab.
  3. Scroll down to find the 'Factory Defaults' or 'Reset' section and click 'Yes' to confirm the reset.
  4. The router will reboot, and all custom settings will be deleted.

Remember, resetting your router, especially a hard reset, should be a last resort. Always ensure you've tried other troubleshooting methods before considering a reset.

In the future, to avoid having to reset your router, consider saving your important settings in a separate document, or use the router's cloud-based backup feature (if available), so you can quickly restore them if needed.

Happy resetting, and may your network connection be strong and stable! If you have any questions or concerns, don't hesitate to leave a comment or seek further assistance.

AD