how to reset check emission system honda civic

Reset Honda Civic Check Emission System: Step-by-Step Guide

By Joshua Williams
AD

Are you a proud Honda Civic owner struggling with the "Check Engine" light or malfunction indicator lamp (MIL)? Don't worry, you're not alone. These lights can be triggered by a range of issues, one of which could be a faulty emission system. If you suspect the issue lies in the emission control system, here's a step-by-step guide on how to reset the check emission system on your Honda Civic.

Before we dive into the process, it's essential to understand that this procedure won't fix any underlying problems. It merely turns off the reminder light and sets the MIL to 'monitor mode' until the next driving cycle. If your Honda Civic still displays the light after the reset, it's crucial to address the root cause to avoid potential damage and costly repairs. Now, let's get started.

Preparation: Understanding Your Honda Civic's Emission System

To begin, it's crucial to comprehend the basics of your Honda Civic's emission system. The system primarily consists of three components: an oxygen sensor, a catalytic converter, and an evaporative emission control system. The oxygen sensor monitors the fuel-to-air mixture, helping your engine functions efficiently. The catalytic converter reduces harmful exhaust gases, while the evaporative emission control system captures fuel vapors from the fuel tank and connects them to the engine.

AD
Meaning, Reset & Fix For Check Emission System Problem Honda Civic
Meaning, Reset & Fix For Check Emission System Problem Honda Civic
Honda Civic Catalytic Converters: Repair or Replacement
Honda Civic Catalytic Converters: Repair or Replacement
Stereo Reset Code For 06-11 Honda CIVIC (LOCKED RADIO) In 5 minutes!!
Stereo Reset Code For 06-11 Honda CIVIC (LOCKED RADIO) In 5 minutes!!

When one of these components fails, your Honda Civic's on-board diagnostic system (OBD) will trigger the "Check Engine" light or MIL, along with the store fault codes. By resetting the emission system, we're essentially telling the computer to forget these codes and begin monitoring again.

Gather Necessary Tools

Before we proceed with the reset process, ensure you have the following tools ready:

How to Reset 2016 Honda Civic Oil Light: Step-by-Step Guide
How to Reset 2016 Honda Civic Oil Light: Step-by-Step Guide
  • A lab scope or scan tool (optional, but helpful for reading and clearing fault codes)
  • Long-nose pliers
  • A socket wrench and suitable sockets

Having these tools on hand will make it easier to diagnose and clear any underlying issues after the reset, if necessary.

Read and Clear Fault Codes (Optional but Recommended)

Using a lab scope or scan tool, read the fault codes stored in your Honda Civic's memory. This step helps identify the root cause of the emission system malfunction and aids in determining if the issue has been resolved after the reset. To read the codes:

AD
  1. Connect the scan tool to your Honda Civic's diagnostic link connector (DLC), usually located under the steering wheel.
  2. Turn the ignition to the 'ON' position without starting the engine.
  3. Follow the scan tool's instructions to initiate the code reading process. The tool should display any stored fault codes.

Using the tool's instructions, clear the fault codes before proceeding with the emission system reset. If you don't have a scan tool, skip this step and proceed with the reset. You can always address the underlying issue later if the "Check Engine" light returns.

Resetting the Check Emission System

Now that you've prepared everything, it's time to reset the check emission system on your Honda Civic.

For vehicles equipped with an automatic transmission, follow these steps:

AD

Resetting without Disconnecting the Battery

  1. Ensure your Honda Civic is parked on a level surface, apply the parking brake, and shift the transmission to 'Neutral'.
  2. Turn the ignition to the 'ON' position, but do not start the engine.
  3. Recovery the gas pedal slowly and steadily for at least seven seconds. You should see the MIL flickering during this process.
  4. After seven seconds, release the gas pedal and allow the engine to idle for around ten seconds.
  5. Repeat steps 3 and 4 three more times. After the fourth repetition, the MIL should remain off, indicating a successful reset.

If your Honda Civic remains equipped with a manual transmission, follow these steps instead:

Resetting by Disconnecting the Battery

  1. Locate the negative battery cable underneath your Honda Civic's hood. Using long-nose pliers or a wrench, remove the grounding cableτέλε(normally black and marked with a '-' or 'GND' symbol) from the battery terminal.
  2. Secure the disconnected cable to prevent accidental contact with other components, and allow your Honda Civic to sit for at least 30 seconds. This step clears the vehicle's memory.
  3. Reconnect the negative battery cable, ensuring a tight and proper connection.
  4. Turn the ignition to the 'ON' position without starting the engine. Allow the engine control module (ECM) to initialize. This process might take a few seconds, and some dash lights may flicker briefly.
  5. Check the MIL; it should remain off, indicating a successful reset.

Regardless of the reset method you've chosen, take your Honda Civic for a test drive in varying driving conditions—both at low and high speeds—over the next 50 to 100 miles (80 to 160 km). This driving cycle allows your vehicle's on-board diagnostic system to recheck and confirm that the emission system is functioning correctly.

Monitor the "Check Engine" Light

After resetting the emission system, keep an eye on the "Check Engine" light or MIL during your test drive. If the light returns, it's an indication that the underlying issue persists, and you should consult a professional mechanic or address the problem yourself.

AD

The most common causes of emission system malfunctions in Honda Civics are faulty oxygen sensors and catalytic converter issues. If the light reappears, it's a good idea to investigate these components first. In some cases, a simple oxygen sensor replacement can resolve the problem. However, if the catalytic converter has been damaged or has worn out, it may require replacement.

Remember, addressing any underlying issues promptly will help preserve your Honda Civic's performance, fuel efficiency, and overall longevity. Ignoring the "Check Engine" light can lead to more severe problems and potential damage to your vehicle's engine.

In the event that the emission system reset doesn't resolve the "Check Engine" light issue, it may be helpful to consult a professional or refer to your vehicle's owner's manual for more specific guidance. By keeping your Honda Civic's emission system in check and addressing any concerns promptly, you'll ensure many happy miles together.

AD