How to Reset Your Astro A20 Headset: A Step-by-Step Guide
Ever felt the need to factory reset your ASTRO A20 wireless headset, perhaps due to connection issues or errors? Resetting your headset to its original factory settings can often solve these problems, giving you a fresh start. Here's a comprehensive guide on "How to Reset ASTRO A20 Headset" in a simple, step-by-step process.
Before we dive into the resetting process, remember that resetting your headset will remove all custom settings and pairings. Make sure you have noted down your ASTRO A20's original settings, just in case you need to refer to them later.
Preparing for ASTRO A20 Headset Reset
It's crucial to prepare your device before carrying out the reset process. Here are two key preparing steps:
Firstly, ensure that your ASTRO A20 headset has enough battery life. Resetting the headset while it's in low battery mode might cause unforeseen issues.
Secondly, make sure your headset isn't currently connected or paired. If it is, manually disconnect any active devices before proceeding to the next step.
initializing the Reset Process
With the preparations in place, you're now ready to initialize the reset process. This simple process requires five easy steps:
1. With your headset powered on, hold the 'Power' button for about 10 seconds. The LED indicator should flash red and green.
2. After flashing, release the 'Power' button. The headset should turn off briefly and then turn back on.
3. Hold the 'Power' button for another 10 seconds. The LED indicator will now only flash red.
4. Release the 'Power' button and wait for approximately 60 seconds.
5. Finally, hold the 'Power' button for one more time for about 5 seconds. The ASTRO A20 headset should now display a slow flashing green LED, indicating that the reset process is complete.
Verifying the Reset
Now that you've reset your ASTRO A20 headset, it's a good idea to verify that this process has been completed successfully.
Have an eligible device ready and try reconnecting to the A20 headset. If you're reconnecting to a PC, navigate to the device manager, search for your headset and you should see 'ASTRO A20' under the Audio inputs category. This confirms that your reset has been successful.
Re-Pairing Your ASTRO A20 Headset
After verifying that your headset reset was successful, you'll now need to re-pair your ASTRO A20 headset with your PC or console:
1. Ensure that the headset is powered on and the LED indicator is in a solid green state.
2. On your PC or console, go to the Bluetooth settings and search for new devices. After searching, an 'ASTRO A20' should appear in the list as available to connect.
3. Follow the pairing instructions on your device, accepting the pairing request and setting the headset to the 'Audio + Chat' mode.
And with that, you've successfully reset and re-paired your ASTRO A20 headset, ready to enjoy your gaming or audio experience once again! Don't hesitate to re-customize your headset with your preferred settings.