how to reset arlo pro 2 camera

Reset Arlo Pro 2 Camera: Step-by-Step Guide

By Hannah Lopez
AD

Is your Arlo Pro 2 camera acting up? You might need to reset it to get it back in tip-top shape. Don't worry, it's a simple process. Let's guide you through it.

Resetting your Arlo Pro 2 camera can help resolve connectivity issues, battery charging problems, or any other glitches it might be experiencing. Here's how you can do it.

Understanding the Reset Process

The reset process for Arlo Pro 2 involves two steps: a soft reset and a factory reset. A soft reset is usually enough to resolve minor issues, while a factory reset is a more drastic solution that should be used sparingly as it will erase all camera settings.

AD
Reolink Argus PT reset (step-by-step) - Learn CCTV.com
Reolink Argus PT reset (step-by-step) - Learn CCTV.com
How to Turn Arlo Camera on | 10 Easy Steps (2026)
How to Turn Arlo Camera on | 10 Easy Steps (2026)
How To Reset The Kasa Camera - Learn CCTV.com
How To Reset The Kasa Camera - Learn CCTV.com

Before you proceed, ensure that your camera is charged and that you have access to the Arlo app or the web portal, as you'll need to sync the camera again after the reset.

Equipment Needed

Before starting the reset process, ensure you have the following:

How to Edit or Create Custom Modes for the Netgear Arlo Pro Camera System
How to Edit or Create Custom Modes for the Netgear Arlo Pro Camera System
  • Your Arlo Pro 2 camera
  • Your Arlo base station
  • Micro USB cable for your camera
  • Access to the Arlo app or web portal

Preparation

Before you start, make sure your camera is charged and disconnected from the magnetic charger. Also, ensure that your Arlo base station is powered on and connected to the internet.

It's a good idea to note down your camera's settings before the reset, as they will be erased during a factory reset. These settings include camera mode, motion sensitivity, and activity zones.

AD

Performing a Soft Reset

A soft reset mitigates minor issues by temporarily turning off the camera. Here's how to do it:

Using the Arlo app

  1. Open the Arlo app and go to the 'Devices' tab.
  2. Tap on your Arlo Pro 2 camera.
  3. Tap on the 'Settings' icon (gear icon) at the top right corner.
  4. Scroll down and tap on 'Reset'.
  5. Select 'Soft Reset' and confirm.

Using the web portal

  1. Navigate to the Arlo website and log in to your account.
  2. Go to the 'Devices' tab and select your Arlo Pro 2 camera.
  3. Click on the 'Settings' tab.
  4. Scroll down to the 'Camera Reset' section and click on 'Soft Reset'.
  5. Confirm the action.

Awaiting the Reset

After performing the soft reset, wait for the camera to reboot. This may take a few minutes. Once it's back online, test its functions to see if the issue has been resolved. If not, you may need to perform a factory reset.

Performing a Factory Reset

A factory reset erases all camera settings and reboots the camera. Here's how to do it:

AD

Using the Arlo app

  1. Follow steps 1-4 from the 'Soft Reset' section.
  2. Select 'Factory Reset' instead of 'Soft Reset'.
  3. Confirm the action. Note that this will erase all camera settings.

Using the web portal

  1. Follow steps 1-4 from the 'Soft Reset' section.
  2. Click on 'Factory Reset' instead of 'Soft Reset'.
  3. Confirm the action. Note that this will erase all camera settings.

Syncing the Camera After Reset

After performing a factory reset, you'll need to sync the camera with the Arlo base station. Here's how:

  • Press the sync button on your Arlo base station.
  • The solid LED light on your camera should turn blue, indicating that it's syncing with the base station.
  • Once the sync is complete, you can set up the camera again in the Arlo app or web portal.

Congratulations! You've successfully reset your Arlo Pro 2 camera. Always remember that performing a factory reset should be a last resort due to the loss of data. Happy monitoring!

AD