how to reset abs light on harley davidson

Reset Harley Davidson ABS Light: Step-by-Step Guide

By Andrew Johnson
AD

If you're a proud owner of a Harley-Davidson, you've probably encountered the dreaded 'Check Engine' or 'ABS' light on your dashboard at some point. While these lights often signal serious issues, there are instances when they illuminate due to minor glitches, and resetting them might do the trick. Today, we'll guide you through how to reset the ABS light on your Harley Davidson in a few simple steps.

Before we dive into the process, it's crucial to understand that the Anti-lock Braking System (ABS) is a safety feature designed to prevent wheel lock-up during heavy braking. If the ABS light illuminates, it usually indicates a problem with the system, and you should address it promptly. However, if the light comes on randomly and disappears after a few seconds, it might be a false alarm, and resetting the system could solve the issue. Always remember, safety first, so if the light persists, consult a professional mechanic or your Harley-Davidson dealership.

Understanding the ABS System

To effectively reset the ABS light on your Harley Davidson, it's essential to have a basic understanding of the ABS system. The ABS system consists of sensors, a control unit, and hydraulic valves. The sensors monitor the speed of your wheels and send signals to the control unit. If the control unit detects wheel lock-up, it triggers the hydraulic valves to modify the brake fluid pressure, preventing the wheels from locking up.

AD
a hand pointing at a speedometer on a motorcycle with the words, i'm going to show you real quick how to check and rest
a hand pointing at a speedometer on a motorcycle with the words, i'm going to show you real quick how to check and rest
How to manually override a Harley-Davidson Security Alarm
How to manually override a Harley-Davidson Security Alarm
Electrical Systems: A Full Video Series
Electrical Systems: A Full Video Series

The ABS system relies on proper communication between its components. If this communication is disrupted, the ABS light may illuminate. Before resetting the ABS light, ensure that the bike's-demons or other external factors haven't caused any physical damage to the system's components.

Preparation Before Resetting the ABS Light

Before you attempt to reset the ABS light, it's crucial to prepare your motorcycle to ensure a smooth process:

How To Choose The Right Replacement Battery For Your Old Harley-Davidson - Jalopnik
How To Choose The Right Replacement Battery For Your Old Harley-Davidson - Jalopnik
Ronnie''s Harley-Davidson''s
Ronnie''s Harley-Davidson''s
  • Find a safe, flat location to work on your motorcycle.
  • Allow your motorcycle to cool down if you've recently ridden it. Working on a hot engine can cause burns.
  • Clean the area around the ABS control unit and sensor to remove any dirt or debris that could interfere with the resetting process.

Locating the ABS Control Unit

The ABS control unit on your Harley Davidson is typically located in one of the following areas, depending on your bike's model and year:

  • Under the seat, near the air filter.
  • Behind the front cylinder, near the ignition coils.
  • Under the fuel tank, near the brake master cylinder.

Consult your motorcycle's owner's manual for the exact location of the ABS control unit on your specific model.

AD

Resetting the ABS Light on Harley Davidson

Now that you're familiar with the ABS system and your motorcycle is prepared, it's time to reset the ABS light. Follow these steps carefully:

Step 1: Disconnect the Battery

Disconnect the negative battery cable from the battery terminal using an adjustable wrench. This step is crucial as it removes any power from the system, preventing any accidental electrical shorts.

Step 2: Locate the ABS Control Unit and Sensors

Locate the ABS control unit and the wheel speed sensors (one on each wheel). Inspect them for any signs of damage, corrosion, or contamination. If you find any issues, address them before proceeding with the reset.

AD

Step 3: Disconnect the Wiring Harness

Disconnect the wiring harness from the ABS control unit. Be gentle while disconnecting the harness to avoid damaging the connector. Some models may require you to remove fairings or other components to access the harness. Consult your owner's manual for specific guidelines.

Step 4: Wait for a Number of Minutes

Reconnect the wiring harness to the ABS control unit. Ensure that the connector is securely connected and fully seated. Some Harley Davidson models may require a specific sequence for reconnecting the harness. Consult your owner's manual for the correct sequence.

Step 5: Reconnect the Battery Cable

Reconnect the negative battery cable to the battery terminal. Ensure that the connection is tight and secure. Do not start the motorcycle immediately after connecting the battery cable.

AD

Step 6: Start the Motorcycle

Start the motorcycle and allow it to idle for a few minutes. The ABS light should now be off, indicating that the reset was successful.

Step 7: Test the Brakes

Test the brakes by gently applying them. The motorcycle should stop as usual, and the ABS light should not illuminate.

Congratulations! You've successfully reset the ABS light on your Harley Davidson. By following these steps, you've probably resolved a minor issue that was causing the ABS light to illuminate. However, always remember that the ABS system is a critical safety feature, and if the light persists after resetting, it's essential to take your motorcycle to a professional mechanic or your Harley-Davidson dealership for further diagnosis and repair.

Happy riding, and remember to always prioritize safety on the open road. If your ABS light illuminated due to an actual issue, ignoring it could lead to severe consequences. Stay safe, and ride on with confidence knowing that you're in control of your motorcycle's well-being.

AD