how to reset a wordlock bike lock

Reset Wordlock Bike Lock in Seconds: Step-by-Step Guide

By Kevin Brown
AD

Ever found yourself in a panic when your WordLock bike lock isn't responding? It happens more often than you'd think. Luckily, resetting your WordLock isn't a complex task. Here's a step-by-step guide to help you through the process.

Before you dive in, ensure you have a flathead screwdriver and a paperclip or a small pin. These are the primary tools you'll need for this reset process. Let's begin.

Preparation for the Reset Process

To start, you'll need to remove your WordLock bike lock from the bike frame. This might involve unscrewing the lock from its mount or releasing it from any retaining bolts. Make sure to do this carefully to avoid hurting yourself or damaging your bike.

AD
How to Reset Wordlock Bike Lock?
How to Reset Wordlock Bike Lock?
How to Lock a Bike WITHOUT a Lock: 6 Ingenious Hacks
How to Lock a Bike WITHOUT a Lock: 6 Ingenious Hacks
How To Open Bike Lock Without Combination - Advanced Lesson
How To Open Bike Lock Without Combination - Advanced Lesson

Once your WordLock is off the frame, you're ready to begin the reset process.

Locating the Reset Hole

The reset hole on your WordLock is hidden under a small cap. This cap can be found at the bottom of the lock, usually on the left-hand side. To access the reset hole, use your flathead screwdriver to carefully pry off the cap. Be gentle; you don't want to damage the cap or the lock.

How to lock your bike (properly) | The Best Bike Lock
How to lock your bike (properly) | The Best Bike Lock
Protection against bike theft: the right bike lock and tips for locking up
Protection against bike theft: the right bike lock and tips for locking up

Once you've removed the cap, you'll see a small hole. This is the reset hole. It's where the magic happens, so to speak.

Preparing the Reset Tool

Now that you've located the reset hole, you need to prepare your reset tool. If you're using a paperclip, bend one end into a small hook. If you're using a small pin, make sure it's long enough to reach the depths of the reset hole and strong enough not to bend or break during use.

AD

Once your tool is ready, it's time to proceed to the next step.

Resetting the WordLock

Insert your reset tool into the reset hole. You might need to push down on the button located near the reset hole to allow the tool to enter further. Don't worry; this button is designed to withstand such pressure.

With your tool properly inserted, it's time to press and hold the button while simultaneously turning the lock combination dials. Start with the first dial, turn it to the first number in your combination, then move to the second dial, and so on, until you've turned all the dials to their respective numbers.

AD

Clearing the Current Combination

As you're turning the dials, you'll feel a certain resistance. This resistance is the lock clearing its current combination. It might take a few tries to get it right, so don't worry if it doesn't work on your first attempt. Just be patient and keep trying.

Once you've cleared the current combination, the dials will spin freely. At this point, you can stop turning them.

Setting the New Combination

Now that the lock is cleared, it's time to set your new combination. Start with the first dial and turn it to the first number you want in your new combination. Then, move to the second dial, and so on, until you've set all the dials to your new combination.

AD

Once you've set your new combination, remove your reset tool from the reset hole and gently push down on the button again to exit the reset mode.

Congratulations! You've successfully reset your WordLock bike lock. Remember to test your new combination to ensure it works properly.

Now that you've mastered the art of resetting your WordLock, you can rest easy, knowing that you can always get back into your bike lock if you ever forget your combination. Happy cycling!

AD