how to reset a linksys router

Reset Your Linksys Router: Step-by-Step Guide

By John Taylor
AD

If your Linksys router isn't functioning as expected, or you want to reset its settings to factory defaults, here's a step-by-step guide on how to perform a reset. This process is safe and often fixes minor issues, but remember that it will also erase any customized settings you've made. Let's dive right in.

There are two ways to reset a Linksys router: using the hardware reset button and through the web-based setup page. We'll cover both methods here.

Performing a Hardware Reset

The hardware reset button is a convenient way to reset your router without accessing the web-based setup page. It's located at the back or bottom of your router, hidden under a small hole. You'll need a paperclip or a similar thin object to press and hold the button.

AD
How to Reset the Linksys WRT54G Wireless-G Router • Technically Easy
How to Reset the Linksys WRT54G Wireless-G Router • Technically Easy
an iphone screen with the message'we are very few settings that need to be changed
an iphone screen with the message'we are very few settings that need to be changed
the linksys re6000 router is on top of a wooden table
the linksys re6000 router is on top of a wooden table

Before you start, ensure your router is turned on. Now, let's proceed with the reset:

Find the Reset Button

Locate the small hole where the reset button is hidden. It's usually at the bottom or back of the router. Some newer models might have the reset button on the side.

How to Update Linksys Router Easy Steps
How to Update Linksys Router Easy Steps
Best Ways to Reset the Linksys WRT54G Router
Best Ways to Reset the Linksys WRT54G Router

If you're having trouble finding it, consult your router's documentation or visit the official Linksys support page, which contains detailed images and guides for each router model.

Press and Hold the Reset Button

Using a paperclip or a similar object, press and hold the reset button for about 10 seconds. You don't need to apply too much pressure—just enough to keep the button depressed.

AD

While holding the button, observe the router's power indicator light. When it starts blinking, release the button. If your router doesn't have a power indicator, you can release the button after 10 seconds.

Resetting the Router through the Web-based Setup Page

The web-based setup page is another convenient method for resetting your router. You'll need to know your router's IP address and have a basic understanding of its web interface. Here's how to proceed:

Note: This method may not work on all Linksys router models. If your router doesn't have a web interface or the reset option isn't present, use the hardware reset method instead.

AD

Access the Router's Web Interface

First, ensure your computer or device is connected to your router's network. Then, open a web browser and enter your router's IP address in the address bar. Press Enter.

If you don't know your router's IP address, you can find it by querying your router's connected devices (if applicable), or use built-in Windows or macOS commands. For detailed instructions, visit the official Linksys support page.

Reset the Router's Settings

Once you've accessed the router's web interface, look for the 'Router Settings' or '.router_login' page. You might need to log in using your router's admin username and password. If you've changed these credentials, enter the new ones. If not, use the default credentials listed in your router's documentation:

AD
  • Username: admin
  • Password: admin

Next, find the 'Administration' or 'Management' tab. This is usually where you'll find the reset option. Click on it and look for the 'Factory Defaults' or 'Reset' button. Click it to reset your router's settings to factory defaults.

After the reset, your router will reboot, and you can set up your network again using the default admin credentials. Don't forget to change your admin password and other security settings for better network protection.

Congratulations! You've successfully reset your Linksys router. Now you're ready to set up your network again or troubleshoot any lingering issues. If you're still experiencing problems, consider checking the router's firmware version or exploring other troubleshooting resources available on the official Linksys support website.

AD