how to reset a hayward salt cell

How to Quickly Reset Your Hayward Salt Cell

By Mark Lopez
AD

Has your Hayward salt cell system been acting up, or perhaps your pool's chlorine levels are fluctuating? It might be time to reset your Hayward salt cell. Don't worry, it's a straightforward process. This guide will walk you through the steps to reset a Hayward salt cell, ensuring your pool water remains sparkling and healthy.

First, let's understand why you might need to reset your Hayward salt cell. Resetting can help when the system isn't generating chlorine efficiently, the salt levels are too low or high, or when there's a coding issue with the control system.

Understanding Your Hayward Salt Cell System

Before we dive into the reset process, it's crucial to familiarize yourself with your Hayward salt cell system. The main components are the salt cell (also called the electrolytic cell), the control system, and the power supply. Understanding these parts will help you navigate the reset process.

AD
How to Tell If Your Salt Cell Needs Replacing
How to Tell If Your Salt Cell Needs Replacing
How to replace the salt cell on a Hayward salt system
How to replace the salt cell on a Hayward salt system
Redirecting...
Redirecting...

The salt cell is where the chlorine production magic happens. The control system monitors the salt level and ífuncvit competitions the chlorine production as needed. The power supply, well, it powers the entire system!

Safety First: Preparing Your Pool And System

Safety is paramount when working with pool systems. Before starting, ensure your pool is off and the power to the salt cell system is turned off. This protects you from potential electrical hazards and prevents algae buildup while you're working.

How to Clean a Salt Cell
How to Clean a Salt Cell
How Long Do Salt Cells Last In Pools?
How Long Do Salt Cells Last In Pools?

It's also a good idea to have a bucket of water nearby. If you accidentally touch a live wire, quickly submerge yourself in the bucket of water to neutralize the electrical charge.

Accessing Your Hayward Salt System

On most models, the control system is located near your pool's equipment. It's usually in a values box, often marked with a 'Pool' or 'Equipment' label. If you're unsure, consult your system manual or contact Hayward's customer support.

AD

Once you've located the control system, open it to expose the electronics. Be careful not to damage any internal components as you work.

Resetting Your Hayward Salt Cell

Now that you're all set up, it's time to reset your Hayward salt cell. The exact process may vary slightly depending on your model, but the following steps should provide a solid foundation.

For this guide, we'll use the Hayward Goldline Control System as an example. If you have a different model, consult your system manual or Hayward's online resources for specifics.

AD

Disconnecting The Power Supply

Start by disconnecting the power supply. This ensures your safety and prevents any interruptions during the reset process. To do this:

  1. Turn off the main power supply switch near your pool's equipment.
  2. Locate the wire harness connected to the control system, usually at the back of the values box. Carefully pull it out to disconnect the power.

Accessing The Control System Menu

With the power disconnected, you can now access the control system menu. Here's how:

  1. Press and hold the 'Mode' button for about five seconds. The control system will enter 'Setup' mode. The display will either show 'SETUP' or a specific setup menu.
  2. Using the '+' and '-' buttons, navigate to the ' эпоувck' option and press the 'Mode' button to select it.
  3. Enter the three-digit password for your system. If you haven't changed it, the default is usually '000' or '123'.

Resetting The Salt Cell System

Now that you're in the reset menu, it's time to reset your Hayward salt cell. Here's how:

AD
  1. Navigate to the 'Reset' option using the '+' and '-' buttons, then press the 'Mode' button to select it.
  2. Confirm the reset by entering the three-digit password again. The control system will display 'Resetting...'.
  3. Wait for the control system to reset. This may take a few moments. Once complete, the display will show 'END' or the main menu.

Restarting And Testing Your System

Great job! You've just reset your Hayward salt cell. Now let's test the system and ensure it's working correctly.

First, double-check that your power supply is still turned off and the wire harness is disconnected. If you're unsure, consult the 'Accessing Your Hayward Salt System' section above.

Reconnecting The Power Supply

Now, carefully reattach the wire harness to the control system. Once connected, turn the main power supply switch near your pool's equipment back on. This will restart your Hayward salt cell system.

Give the system a few minutes to power up and start functioning. If everything is working correctly, the control system should display the current salt level and chlorination status.

Monitoring And Maintaining Your Salt Cell System

After a reset, it's a good idea to monitor your Hayward salt cell system closely. Keep an eye on the salt level and chlorine production to ensure everything is functioning as expected.

Regular maintenance is key to keeping your salt cell system running smoothly. This includes cleaning the salt cell periodically, checking salt levels, and ensuring the control system is functioning correctly.

Remember, if you're ever unsure about any aspect of your salt cell system, don't hesitate to contact Hayward's customer support or a professional pool technician. Your pool's health and safety are always the top priority.

And there you have it! You've successfully learned how to reset a Hayward salt cell. Happy swimming, and remember to keep your pool water safe and clean with regular maintenance and smart use of your salt cell system.

AD