how to replace u-joints

Guide: Replacement of U-Joints - Step-by-Step

By Anthony King
AD

If you're experiencing vibrations or clunking noises while driving, your vehicle's universal joints (U-joints) might be worn out. Replacing them isn't rocket science, but it does require some tools and know-how. Here's a comprehensive guide on how to replace U-joints like a pro.

Before we dive in, it's crucial to understand what U-joints are and their importance. U-joints allow your driveshaft to transmit power despite its constant angle change, making them a critical component in your vehicle's drivetrain. Now, let's get down to business.

Gathering Tools and Parts

First, you'll need to gather your tools and parts. You can find replacement U-joints at your local auto parts store. You'll also need:

AD
How To Replace U-Joints With Impact Sockets: Eastwood Shows Us How! - BangShift.com
How To Replace U-Joints With Impact Sockets: Eastwood Shows Us How! - BangShift.com
Wrenchin' Wednesday: Replacing U-joints without a shop press - Hagerty Media
Wrenchin' Wednesday: Replacing U-joints without a shop press - Hagerty Media
How to Replace a Worn Out U-Joint | YourMechanic Advice
How to Replace a Worn Out U-Joint | YourMechanic Advice
  • Socket and ratchet set
  • Universal joint press
  • C-clamp or vice grips
  • Torque wrench
  • Penetrating oil (like WD-40)
  • Jack and jack stands
  • Anti-seize compound

Materials and Safety Equipment

Don't forget safety gear: gloves, safety glasses, and maybe a face mask, especially if you're working in a confined space like beneath a vehicle.

You'll also need a new U-joint for each one you're replacing. Ensure you're getting the correct size for your vehicle by checking your owner's manual or looking up your vehicle's make, model, and year online.

U Joint & Steering Shaft in Ohio
U Joint & Steering Shaft in Ohio
Is Your Ride Rattling? Find and Fix Suspension Issues With These Expert Tips
Is Your Ride Rattling? Find and Fix Suspension Issues With These Expert Tips

Removing the Old U-joint

Now, let's dive into the process of removing the old U-joint.

First, you'll need to raise the vehicle using a jack and support it with jack stands to ensure it's stable. Next, locate the U-joint on your vehicle's driveshaft. It's usually found near the transmission or differential.

AD

Disconnecting the Driveshaft

To access the U-joint, you might need to disconnect the driveshaft from the differential or transmission. Here's how:

  1. Using a socket and ratchet, loosen the mounting bolts that hold the driveshaft in place.
  2. Apply penetrating oil to the bolts to help break any rust or corrosion.
  3. Once the bolts are loose, tap them gently with a hammer to break any remaining rust.
  4. Finish removing the bolts by hand, then use a pry bar or a hammer to carefully tap the driveshaft out of its place.

Pressing Out the Old U-joint

Now that you have access to the U-joint, it's time to remove it. The easiest way to do this is by using a universal joint press.

If you don't have access to one, you can use a hammer to carefully drive the U-joint out from its housing. Place a block of wood on the opposite side of the U-joint to distribute the force of the hammer blows. Be prepared for some resistance; you might need to repeat the process of applying penetrating oil and tapping the joint with a hammer.

AD

Installing the New U-joint

With the old U-joint removed, it's time to install the new one.

Before you start, make sure the new U-joint's size and design match the old one. Apply a small amount of anti-seize compound to the new U-joint's splines to help prevent rust and make future removal easier.

Pressing In the New U-joint

Use your universal joint press to install the new U-joint. Set the press to the correct size for your U-joint, then carefully place the new joint into the press. Slowly squeeze the press to seat the U-joint in its housing.

AD

If you don't have a universal joint press, you can use a C-clamp or vice grips to slowly work the new U-joint into place. Again, be prepared for some resistance, and go slowly to avoid damaging the new joint.

Re-assembling and Torquing

Once the new U-joint is seated, it's time to re-assemble the driveshaft and bolts. Before you torque the bolts, apply a small amount of anti-seize compound to the threads to prevent rust.

Using a torque wrench, tighten the bolts to the manufacturer's specifications. Be careful not to over-tighten, as this can strip the threads or cause the bolts to snap.

With the new U-joint installed and torqued, you're ready to lower your vehicle off the jack stands and take it for a test drive. Keep an eye out for any vibrations or clunking noises to ensure the new U-joint is working correctly.

Replacing a U-joint can seem daunting at first, but with the right tools and some patience, it's a task well within the reach of the average home mechanic. Happy wrenching!

AD