Step-by-Step Guide: How to Replace Tub Faucet Cartridge
So, your tub faucet has become a leaky vals or stopped working altogether? It's time for a change. Replacing the faucet cartridge can resolve these issues, and it's a DIY project you can tackle today. Let's dive in and learn how to replace tub faucet cartridge in a step-by-step guide.
Before you start, gather these tools and parts: replacement cartridge kit, adjustable pliers, flathead screwdriver, penetrating oil, rag, towels, and gloves.
Identifying Your Faucet Type
First, understand your faucet type. Tub faucets come in two main types: compression and cartridge. Cartridge faucets fall into three categories – washerless, single-handle, and double-handle. This guide focuses on single and double-handle cartridge faucets.
Next, turn off the water supply to your faucet. Locate and close the valves under the sink or at the main water supply. Open the faucet to relieve water pressure and prevent any leaks.
Preparing the Faucet
Cover the drain hole with a rag to prevent losing small parts down the drain. Use penetrating oil around the faucet handle set screw and soak it in for around 30 minutes to help loosen it.
Locate the set screw on the faucet handle. It could be hidden under a decorative cap; remove it using pliers. Then, use an Allen wrench or a flathead screwdriver to remove the set screw. Carefully pull off the faucet handle using your pliers or hands.
Removing the Faucet Cartridge
Remove the retaining clip holding the cap on the faucet body. Then, remove the cap using pliers. You'll see the faucet cartridge inside the faucet body. Remove the rubber O-ring and the lock washer above the cartridge using pliers.
Insert the tip of theiest pliers into the faucet cartridge hole and gently pull to remove the cartridge. If it's stuck, use the pliers to turn the cartridge slightly back and forth while pulling. Gently rock it until it's free.
Examining the Replacement Cartridge
Unpackage your replacement faucet cartridge kit. Make sure you've got the right one for your faucet make and model. Some cartridges are direction-specific; ensure you understand which way it should face.
Aspray penetrating oil around the pivot point of the new cartridge and the return plate to ease movement. Let it soak for 15 minutes.
Installing the New Faucet Cartridge
Reinstall the lock washer and O-ring over the cartridge. Place the faucet cap back on, ensuring it's fully seated. Replace the retaining clip.
Reassembling the Faucet
Replace the faucet handle and secure it with the set screw you removed earlier. Ensure the handle turns smoothly and without resistance.
Turn on the water supply to your faucet at the valves you closed earlier. Check for leaks around the faucet, handle junction, and supply lines. If there are no leaks, you've successfully replaced your tub faucet cartridge.
Regularly inspect your faucet for any signs of wear or leaks. Proper maintenance can extend the life of your faucet and prevent the need for frequent replacements. Happy upgrading!