how to replace the exhaust fan in bathroom

How to Replace a Bathroom Exhaust Fan

By Anthony Young
AD

Does your bathroom exhaust fan make strange noises, or has it stopped working altogether? Replacing it might seem like a daunting task, but with the right steps, it's a manageable DIY project. Here's a comprehensive guide to help you replace your bathroom exhaust fan step by step.

Before we dive in, ensure you have the necessary tools and a new fan that's compatible with your current electrical setup. If you're unsure about any part of the process, don't hesitate to consult a professional electrician.

Preparation and Safety Measures

Replacing an exhaust fan involves working with electricity, so safety should be your top priority.

AD
How To Replace a Bathroom Exhaust Fan
How To Replace a Bathroom Exhaust Fan
bathroom lighting with exhaust fan cover upgrade and 5 minute update on the ceiling for less than five minutes
bathroom lighting with exhaust fan cover upgrade and 5 minute update on the ceiling for less than five minutes
How to install a bathroom exhaust fan — The White Apartment
How to install a bathroom exhaust fan — The White Apartment

Before you begin, turn off the power to the fan at the circuit breaker. To confirm the power is off, use a non-contact voltage tester near the fan's wires.

Gather Your Tools and Materials

Here's a list of tools and materials you'll need for this project:

Bathroom Ventilation Ideas & Installation with Pictures - Home Improvement Ideas and Tips
Bathroom Ventilation Ideas & Installation with Pictures - Home Improvement Ideas and Tips
Bath Fan Replacement in 10 Minutes or Less!
Bath Fan Replacement in 10 Minutes or Less!
  • New exhaust fan
  • Screwdriver (Philips or flathead, depending on your fan)
  • Wire stripper
  • Non-contact voltage tester
  • Wire nuts
  • Electrical tape
  • Drywall screws (if replacing the fan with a larger model)

Access the Fan and Wiring

Remove the fan's cover or grill to access the motor and wiring. If there's a light fixture connected to the fan, you'll also need to remove that.

Use a screwdriver to remove the screws securing the fan to the ceiling. Gently pull the fan away from the ceiling to expose the wiring. If the fan is stuck, you might need to cut away some drywall to free it.

AD

Removing the Old Fan

Now that you've accessed the wiring, it's time to remove the old fan.

Carefully disconnect the wires from the fan. There should be two wires - one for power and one for the switch. Use a wire stripper to remove about 3/4 inch of insulation from each wire.

Disconnecting the Wires

Twist the exposed ends of the wires together, then wrap them securely with electrical tape. This will help prevent a short circuit while you're disconnecting the fan from the electrical box.

AD

Remove the mounting screws securing the fan to the electrical box, and lower the fan down. If the fan is connected to a light fixture, disconnect the light from the fan's electrical box before removing it.

Preparing the New Fan

Before installing the new fan, ensure it's the same size as the old one. If not, you'll need to cut away some drywall to accommodate the new fan's size.

Install the new fan's mounting bracket into the electrical box. If the new fan is larger, you might need to use drywall screws to secure the bracket to the framing behind the drywall.

AD

Wiring the New Fan

Now it's time to wire the new fan. Connect the power wire (usually black) to the power wire in the electrical box. Twist the wires together and secure them with a wire nut.

Connect the switch wire (usually white) to the other wire in the electrical box. Again, twist the wires together and secure them with a wire nut.

Connecting the Ground Wire

If there's a ground wire (usually green or bare), connect it to the green ground screw on the fan's mounting bracket. If there's no ground wire, connect the green wire to the metal electrical box.

Tighten the mounting screws to secure the fan to the electrical box. Reattach the fan's cover or grill, and you're done!

Turning the power back on at the circuit breaker, the new fan should now work perfectly. If not, double-check your connections and ensure all wires are secure. Regularly cleaning your bathroom exhaust fan can help prevent future issues and keep your bathroom fresh and healthy.

AD