how to replace snowblower belt

How to Replace Snowblower Belt

By Nicole Young
AD

Is your snowblower letting you down in the middle of a blizzard? A worn-out belt could be the culprit. Replacing it might seem daunting, but we've simplified the process for you. Follow our comprehensive guide to replace your snowblower belt with ease.

Before you begin, ensure you have the right belt for your snowblower model. Consult your user manual or contact the manufacturer if you're unsure. Safety is paramount, so unplug the snowblower and let it cool down before starting the procedure.

Gathering Your Tools and Materials

Before you dive into the process, ensure you have all the necessary tools and materials:

AD
How to Change a Snowblower Belt Step-by-Step Guide for Beginners
How to Change a Snowblower Belt Step-by-Step Guide for Beginners
How to Replace Belts on a Snowblower
How to Replace Belts on a Snowblower
How to Replace a Snow Blower Belt
How to Replace a Snow Blower Belt

  • New snowblower belt
  • Socket wrenches
  • Pliers
  • Adjustable wrench
  • Screwdriver (Philips or flathead, depending on your model)

How to replace a snowblower auger belt | Repair guide
How to replace a snowblower auger belt | Repair guide
How to Replace Belts on a Snowblower
How to Replace Belts on a Snowblower

Accessing the Belt

First, you need to expose the belt. For most models, this involves removing the side panel of the snowblower. Start by disconnecting any electrical wires attached to the panel. Then, use a screwdriver or socket wrench to unscrew the bolts holding the panel in place. Carefully remove the panel,(set it aside for now.)

In some models, you might need to remove a shroud or an auger cover. The process is similar - disconnect any wires, unscrew the bolts, and carefully remove the cover.

AD

Removing the Old Belt

Once you've accessed the belt, you'll notice it's wrapped around several pulleys. Start by loosening the belt tension adjustment bolt using a socket wrench. This will loosen the belt's grip on the pulleys. Next, use a flathead screwdriver or pliers to pry the belt off the pulleys, working from one end to the other.

If the belt is severely damaged or you can't pry it off, you might need to cut it with a utility knife. However, this should be a last resort as it may cause snapped pieces to fly into the air.

Installing the New Belt

With the old belt removed, it's time to install the new one. First, align the new belt with the pulleys, ensuring it's facing the right direction (the same as the old belt).

AD

Next, start feeding the belt onto the pulleys. Begin with the smallest pulley (usually the one closest to the engine) and work your way around the larger pulleys. Make sure the belt is evenly distributed and not too tight or too loose. This might require some adjustment and finagling.

Tightening the New Belt

Once the belt is on the pulleys, it's time to tighten it. Rotate the tension adjustment bolt using a socket wrench. The ideal tension should be enough that you can pull the middle of the belt about 1/4 to 1/2 inch away from the pulleys with your hand, but not so much that it feels excessively loose.

An alternative method to check the tension is to try rotating the blades by hand. If you can't rotate them with medium force, the belt might be too tight. If they rotate too easily, the belt might be too loose.

AD

Reassembling the Snowblower

Now that your new belt is in place, it's time to reassemble your snowblower. Start by reattaching the side panel, shroud, or auger cover, making sure to reconnect any electrical wires you detached earlier. Secure the panel using the original bolts and tighten them with a socket wrench or screwdriver.

Give the snowblower a test run to ensure the belt is functioning correctly. If everything seems to be working as it should, you're done!

Regular maintenance, like checking and replacing your snowblower belt, can extend the life of your machine and ensure you're ready for the next blizzard. Stay safe and happy snowblowing!

AD