how to replace simplisafe entry sensor battery

Simplisafe Entry Sensor Battery Replacement Guide

By Sarah Harris
AD

Are you tired of your SimpliSafe entry sensor not working as it should? It might be time to replace its batteries. Don't worry, this isn't a complicated task. Here's a step-by-step guide on how to replace your SimpliSafe entry sensor battery.

First, let's identify the battery in question. Your SimpliSafe entry sensor uses a CR2032 coin cell battery - these are common in many devices due to their compact size and longevity.

Ordering a New Battery

Before we begin, ensure you have a new CR2032 battery. You can order these online or pick them up from most electronics or department stores. If you're unsure, check your existing battery to make sure you're ordering the correct size and type.

AD
How to Replace ADT Window Sensor Battery
How to Replace ADT Window Sensor Battery
How to Reset Simplisafe Entry Sensor
How to Reset Simplisafe Entry Sensor
How to Replace Battery in Door Alarm Sensor
How to Replace Battery in Door Alarm Sensor

Once you have your new battery, you're ready to proceed with the replacement. Let's dive right in.

Preparing to Replace the Battery

Start by disarming your SimpliSafe system to prevent any false alarms. Then, carefully remove the entry sensor from its mounting bracket. This should only require a slight twist and pull.

How to Install Simplisafe Entry Sensor on Door With Molding
How to Install Simplisafe Entry Sensor on Door With Molding
How to Add Entry Sensor SimpliSafe | 6 Easy Steps (2026)
How to Add Entry Sensor SimpliSafe | 6 Easy Steps (2026)

Next, locate the battery compartment. It's usually on the back or side of the sensor, under a small plastic cover. Use a coin or a small flathead screwdriver to gently pry off the cover. Be careful not to damage the sensor.

Removing the Old Battery

Once you have the cover off, you should see the old CR2032 battery. Use your finger or a pair of tweezers to carefully lift the battery out of its compartment. Be gentle to avoid bending the contacts.

AD

If the battery is stuck, try using a small amount of isopropyl alcohol on a cotton swab to clean the contacts. This can help remove any corrosion and make it easier to remove the battery.

Installing the New Battery

Now that the old battery is out, it's time to insert the new one. Make sure the positive and negative sides are aligned with the contacts in the battery compartment. The positive side is typically marked with a '+' symbol.

Press the new battery into place firmly but gently. It should click into place and sit securely in the compartment.

AD

Testing the New Battery

Carefully replace the battery compartment cover, ensuring it's properly sealed. Then, reattach the entry sensor to its mounting bracket. Rearm your SimpliSafe system and test the sensor to ensure it's working properly.

If your sensor is still not functioning as it should, double-check that you've inserted the battery correctly and that there are no obstructions in the sensor's path.

Regularly checking and replacing your SimpliSafe entry sensor battery will ensure your system continues to protect your home effectively. If you have any further questions or encounter issues, don't hesitate to contact SimpliSafe customer support for assistance.

AD
AD