Step-by-Step: Replace Shower Handle Yourself
It's not uncommon for shower handles to become loose, break, or simply wear out over time. Replacing them is a straightforward DIY project that can save you the expense of calling in a professional. Follow this step-by-step guide to learn how to replace shower handle safely and effectively. Let's dive in!
Before we begin, ensure you have the right parts and tools for the job. You'll need a new shower handle, a screwdriver (usually Phillip's head), an adjustable wrench, and possibly some Teflon tape or plumber's grease, depending on your shower faucet type.
Preparation: Gathering Tools and Materials
Start by turning off your shower's water supply. You can find the valves behind the shower wall. If unsure, turn off the main water supply to the entire house. The last thing you want is a water leak while you're working.
Next, open the shower valve to relieve any remaining water pressure. You can do this by turning the shower handle to the on position. Run the water until it stops, then turn off the fixture.
Removing the Old Shower Handle
Your shower handle is likely held in place by multiple screws. Start by removing the set screw on the handle. This is usually a small Phillip's head screw found on the underside of the handle.
Once the set screw is removed, your handle should lift off easily. If not, you might need to use an adjustable wrench to gently loosen the handle from the faucet stem. Be careful not to strip any threading or damage the faucet while doing so.
Inspecting Internal Components
With the handle off, you should see the faucet stem and possibly a few other internal components. It's normal for these to be a bit rusty, especially if your shower is older. If everything appears to be in good working order, you can proceed with confidence.
However, if you notice any cracks on the faucet stem or other damage, you may need to replace more than just the handle. In such cases, it might be best to consult with a professional plumber.
Installing the New Shower Handle
Now that the old handle is out, it's time to install the new one. If your new handle comes with installation instructions, be sure to follow them. However, the process generally follows these steps:
First, apply a small amount of Teflon tape or silicone grease to the threads of the faucet stem. This will help create a watertight seal and prevent your new handle from leaking.
Securing the New Shower Handle
Next, screw the new handle onto the faucet stem by hand. Do not overtighten. Teflon tape and silicone grease are designed to create a watertight seal at lower torques than metal-to-metal connections.
With the handle securely in place, you can now replace the set screw. Tighten it using your screwdriver, but again, avoid overtightening. Too much pressure can strip the screw or crack the handle.
Testing the New Shower Handle
Finally, turn your water supply back on. Start with the shower supply valve, then check the main water supply if you had to turn it off. Run the water through the shower to check for any leaks around the new handle.
If everything is working correctly, congratulations! You've successfully replaced your shower handle. If not, double-check your work, ensuring the handle is tight enough to prevent leaks, but not so tight as to strip or break the faucet stem.
In many cases, replacing a shower handle is a straightforward task that can save you time and money. However, if you're ever unsure about any aspect of the process, don't hesitate to consult a professional plumber. Happy DIYing!