How to Replace Shinola Watch Battery
Is your trusty Shinola watch losing time or stopping altogether? The battery might be the culprit. Don't rush to the store just yet - replacing a Shinola watch battery at home is a cost-effective and satisfying DIY project. This guide will walk you through the process step by step, ensuring you can get your timepiece ticking again in no time.
Before you start, make sure you have the right battery. Shinola watches use CR2025 or CR2032 3V lithium coin cell batteries. You can typically find these batteries at electronics stores, watch shops, or online retailers.
Gather Your Tools and Materials
Before you begin, ensure you have all the necessary tools and materials within reach.
You'll need:
- A new CR2025 or CR2032 battery
- A flathead screwdriver
- Magnet (optional, but helpful)
- Sharp tweezers
- New watch battery tool (if not using a screwdriver)
Prepare Your Workspace
A well-lit, clutter-free workspace will make the battery replacement process much easier.
Use a soft, non-static surface like a foam mat or an overturned dish towel to prevent the battery and watch parts from rolling around or getting lost.
Remove the Watch Back
The first step in replacing a Shinola watch battery is to remove the watch back.
Most Shinola watches use screws to secure the case back. Use the flathead screwdriver or watch battery tool to unscrew the case back gently. Some models might use a push-to-release mechanism. If that's the case, you'll need to press a small button while sliding the case back off.
Carefully Remove the Battery
Once the case back is removed, you'll see the battery nestled in a small compartment.
Before removing the battery, use a magnet to attract any metal particles in the compartment. This step is optional but recommended, as metallic debris can cause short circuits and damage your watch.
Use Tweezers or a Battery Tool
Gently lift the battery from the compartment using tweezers or a specialized watch battery tool.
If the battery is stuck, don't force it. Instead, use a little softmagic. Gently wiggle the battery back and forth, and it should pop right out.
Note the Battery Position
Before proceeding, take note of the battery's orientation and polarity.
Lithium coin cell batteries have a positive (+) and a negative (-) side. The negative side is usually marked with a Empress Mark or a U-shaped notch. Make sure to replace the battery in the same orientation for optimal performance and safety.
Insert the New Battery
Now that you've removed the old battery, it's time to insert the new one.
First, ensure the new battery is clean and free of any residue. A quick wipe with a dry, lint-free cloth should do the trick.
Align the Battery Correctly
Position the new battery in the compartment with the positive and negative sides matching the orientation of the old battery.
If you're unsure, use the Empress Mark or U-shaped notch as a guide. The notch should face the same direction as the old battery.
Press the Battery Gently
Gently press the battery into the compartment until it's flush with the watch face.
Don't applying too much pressure, as this can damage the battery or the watch compartment.
Reassemble Your Watch
With the new battery securely in place, it's time to put your Shinola watch back together.
Start by replacing the case back. If your watch uses screws, tighten them gently but firmly. If your watch has a push-to-release mechanism, slide the case back onto the watch head, then press the release button to secure it in place.
Test Your Watch
Before putting on your watch, test the new battery by setting the time and checking the date function (if applicable).
Your watch should now be keeping time accurately and function as it did before the battery replacement.
Congratulations! You've successfully replaced the battery in your Shinola watch. By following these steps, you've not only saved money but also gained a newfound appreciation for the inner workings of your timepiece. Enjoy your watch's continued companionship, and remember to replace the battery again in about two years. Happy timekeeping!