Replace Your Salomon Quicklace in a Flash: Step-by-Step Guide
Tired of your Salomons coming loose halfway through your run? The Quicklace system is designed for ease of use, but inevitably, it wears out. Replacing it can seem daunting, but don't worry, we've got you covered. Here's a step-by-step guide on how to replace your Salomons' Quicklace.
Before we dive into the process, ensure you have a new Quicklace set, a flathead screwdriver, and a little patience. Let's get started!
Preparing Your Salomons
Before you begin, make sure your Salomons are unlaced and the tongue is removed to give you ample space to work with.
Next, locate the small, plastic lace keeper at the top of your shoe. This is where your Quicklace is secured. Using your flathead screwdriver, carefully pry it off. Be gentle; you don't want to damage it.
Removing the Old Quicklace
With the keeper removed, you should now see the ends of your Quicklace tucked into a small hole. Using the screwdriver or your fingers, pull these ends out gently. The Quicklace should now be free and can be removed completely.
Once the lace is out, use a pair of scissors to cut it into smaller pieces for easy disposal. You don't want it getting tangled in your recycling or harming wildlife.
Cleaning Your Salomons
Now that the old Quicklace is out, it's time to clean the channel where it was housed. Use a clean, dry cloth to wipe the area. This ensures your new Quicklace doesn't get stuck on any dirt or debris.
While cleaning, also check the integrity of the channel. If it's frayed or damaged, you might want to consider using a different type of lace or speaking to a professional at your local Salomon store.
Installing the New Quicklace
With the area clean and dry, it's time to install your new Quicklace. Start by feeding one end of the lace into the hole where the old one was removed. Make sure the laces are entering from opposite sides to enable a secure tie.
Push the lace in until it's securely in place. The lace keeper will help keep it from coming out. You might need to use the screwdriver to fully insert it. Be careful not to force it, as this could damage the lace or the shoe.
Lacing Up
With the new Quicklace inserted, it's time to lace up your Salomons. Start by tucking the lace ends under the lace keeper. This will prevent them from unraveling while you're on the move.
Next, pull the lace ends out of the other side of the shoe. Tighten the lace as you would normally, and you're good to go! Remember, the Quicklace system allows you to pull both ends simultaneously for a quick, tight lacing.
Testing Your Handiwork
Before you head out for your next run or hike, give your new Quicklace a test. Lace up and loosen or tighten the laces a few times to make sure everything is working as it should.
If you feel any resistance or hear any unusual noises, double-check your installation. It might be that the lace isn't fully seated or there's a small snag holding it in place.
Congratulations! You've just replaced your Salomons' Quicklace. Now, get out there and enjoy your adventures, knowing your shoes are ready for whatever you throw at them. Happy trails!