how to replace rear main seal chevy 350

How to Replace Rear Main Seal on Chevy 350

By Joshua Thompson
AD

If you're facing oil leaks around the rear of your Chevy 350 engine, it's possible that your rear main seal has failed and needs replacing. Don't worry, you can tackle this task at home with some basic tools and our comprehensive guide. This article will walk you through the process, ensuring you're well-equipped with the necessary steps and tips to replace your rear main seal like a pro.

Replacing the rear main seal on your Chevy 350 might seem daunting, but with the right preparation and following these steps, you'll find it's an achievable task. Remember, safety first – ensure your vehicle is cool before starting any work, and always use appropriate safety gear.

Gather Your Tools and Parts

Before diving under the hood, make sure you have all the necessary tools and parts. The right equipment makes the job easier and safer:

AD
KOITOTO : Rekomendasi Bandar Situs Togel Online 4D Terlengkap Pilihan Masa Kini
KOITOTO : Rekomendasi Bandar Situs Togel Online 4D Terlengkap Pilihan Masa Kini
Chevy 305 Engine Rear Main Seal Replacement
Chevy 305 Engine Rear Main Seal Replacement
How-To: Replace a Jeep 4.0L Rear Main Seal
How-To: Replace a Jeep 4.0L Rear Main Seal

  • Socket and wrench set
  • Torque wrench
  • Crankshaft pulley installer
  • Rear seal installer
  • New rear main seal
  • New crankshaft rear oil seal
  • New-modified oakwood
  • RTV (Room Temperature Vulcanizing) sealant
  • Engine oil
  • Engine oil filter

Rear Engine Oil Leaks: Finding The Real Location Of The Leak
Rear Engine Oil Leaks: Finding The Real Location Of The Leak
How-To: Replace a Jeep 4.0L Rear Main Seal
How-To: Replace a Jeep 4.0L Rear Main Seal

Prepare the Engine

Begin by draining the engine oil and removing the oil pan. This will give you better access to the rear main seal area. Don't forget to replace the oil pan gasket while you're at it.

With the oil pan removed, you'll see the crankshaft pulley. Use a heavy-duty screwdriver or pry bar to carefully remove the silicone rubber plug from the pulley's center. Be cautious, as the plug could break apart, making it harder to remove.

AD

Install the Pulley Puller and Rear Seal Installer

Mount the crankshaft pulley puller onto the center of the crankshaft. Tighten the puller bolts securely, but be careful not to overtighten and damage the crankshaft.

Next, install the rear main seal installer tool, which is designed to push the remaining rear main seal out. Make sure the tool is properly mounted to the back of the crankshaft and the seal. Once mounted, firmly pull the crankshaft pulley puller, slowly and steadily, to remove the seal.

Remove and Install the New Rear Main Seal

With the old rear main seal removed, it's time to install the new one. First, inspect the crankshaft and engine block mating surfaces for any damage or burrs. If necessary, use a fine file or emery cloth to smooth any irregularities.

AD

Apply a thin layer of RTV sealant to the new rear main seal's inner diameter. Ensure the sealant is evenly spread, creating a consistent bead around the seal.

Install the New Seal

Fit the new rear main seal onto the crankshaft, ensuring it's fully seated against the rear main bearing cap. Use the rear seal installer tool to press the seal firmly and evenly onto the crankshaft. Make sure the seal compresses enough to create a tight seal but not so much that it causes excessive deformation.

Once the new rear main seal is installed, apply a second thin layer of RTV sealant to the seal's outer diameter. This will help create a better seal between the seal and the engine block.

AD

Reassemble the Engine

Reinstall the crankshaft pulley, using a dedicated pulley installer tool to apply even pressure and ensure a proper fit. Tighten the pulley bolts to the specified torque found in your vehicle's repair manual to avoid any future issues.

Now that the crankshaft pulley is reinstalled, go ahead and replace the oil pan and new gasket. Tighten the oil pan bolts to the specified torque as well. Refill the engine with new oil and replace the oil filter.

After replacing the rear main seal on your Chevy 350, take your vehicle for a test drive. Keep an eye on your oil pressure and look for any signs of leaks. If everything checks out, you've successfully replaced your rear main seal and can enjoy the peace of mind that comes with a professional job – done by you!

AD