how to replace rav4 key battery

How to Replace Rav4 Key Battery

By David Young
AD

Don't let a faulty key fob ruin your adventures with your trusty Toyota RAV4. Replacing the battery is a straightforward, budget-friendly task that you can accomplish at home. Let's dive into a step-by-step guide on how to replace your RAV4 key battery.

Before we proceed, double-check your model year. The process may vary slightly between different RAV4 generations. This guide is tailored for RAV4 models from 2013 onwards. Having the right tools and a new battery in tow ensures a smooth process. You'll need a CR2032 coin cell battery, a small flathead screwdriver, and some needle-nose pliers.

Understanding Your RAV4 Key Fob

The RAV4 key fob is a pretty robust gadget, but its battery is not invincible. A CR2032 battery, measuring about 20mm in diameter and 3mm in thickness, powers your fob. It's replaceable, and you can find these coin cell batteries at most electronics stores or online.

AD
How to ● Toyota Key Fob Remote Keyless Battery Change/Replace
How to ● Toyota Key Fob Remote Keyless Battery Change/Replace
How to ● Toyota Key Fob Remote Keyless Battery Change/Replace
How to ● Toyota Key Fob Remote Keyless Battery Change/Replace
How to ● Toyota Key Fob Remote Keyless Battery Change/Replace
How to ● Toyota Key Fob Remote Keyless Battery Change/Replace

Your RAV4 key fob consists of two main parts: the exterior shell and the internal circuit board with the battery. The key and the physical remote lock are separate from the fob, so you don't need to worry about them during this process.

Replacing the CR2032 Battery

Now that we've demystified the RAV4 key fob let's replace the battery. The process takes about 5 minutes, and you don't need any specialized tools. Here's a step-by-step guide:

How To Replace 2013 - 2018 Toyota RAV4 Remote Fob Key Battery - RAV 4 Replacement Batteries Change
How To Replace 2013 - 2018 Toyota RAV4 Remote Fob Key Battery - RAV 4 Replacement Batteries Change
Honda Smart Key Remote Fob Battery Change - How To Remove Replace Honda Fit & HR-V Key Batteries HRV
Honda Smart Key Remote Fob Battery Change - How To Remove Replace Honda Fit & HR-V Key Batteries HRV

Preparation

Start by gathering your tools and the new CR2032 battery. Make sure the fob is cleaned and free from debris for easier disassembly.

If the fob still has some juice left, it's a good idea to delete and re-add your key's settings in your RAV4's memory to ensure everything works smoothly after the battery switch. Here's a quick guide on how to do this:

AD
  • Insert your original key into the ignition and start the car.
  • Press the "Lock" button on your key fob five times within 5 seconds.
  • Remove your key from the ignition, wait for 10 seconds, then reinsert it and turn to the "ACC" position.
  • innerhalb the next 10 seconds, reinsert and remove the key from the ignition three times.

Disassembling the Fob

With the preparation done, it's time to disassemble the fob. First, locate the Brazilians, a tiny hole on the back of the fob. Insert the small flathead screwdriver into the hole and gently pry the casing open.

You should feel a slight "click" as the two halves of the fob separate. Use your fingers to carefully pull the back casing away from the front, revealing the internal circuit board with the battery.

Removing the Old Battery

Once you've exposed the circuit board, locate the CR2032 battery. It's held in place by a plastic clip at one end and a small piece of conductive foam on the other. Use your needle-nose pliers to carefully lift and remove the clip.

AD

The battery may be stuck in place due to the conductive foam. If this happens, use your pliers to gently peel the foam away from the battery. Once the clip and foam are removed, you should be able to lift the old battery out of its compartment.

Installing the New Battery

Identify the positive and negative terminals on your new CR2032 battery. The positive terminal (usually marked with a "+" or "+/-") should face the same direction as the terminals on the circuit board.

Place the new battery into its compartment, ensuring the positive and negative terminals align with the corresponding points on the circuit board. Gently press the battery into place, and reattach the plastic clip using your needle-nose pliers. Ensure the clip is secure to keep the battery from falling out.

AD

Reassembling the Fob

With the new battery installed, it's time to put the fob back together. Align the front and back casings, and snap them back into place. You should hear a satisfying "click" as the two halves lock together.

Proceed with re-pairing your key fob to your RAV4, following the preparation steps in reverse. Now, your RAV4 key fob should be as good as new, ready to assist you on your next adventure!

Tips for Prolonging Your Key Fob's Battery Life

While CR2032 batteries are pretty reliable, you can take steps to extend their life and prevent early battery changes. Here are some tips to keep in mind:

Keep Your Fob Away from Extreme Temperatures

Coin cell batteries like the CR2032 have trouble performing in extreme temperatures. Keep your key fob away from direct sunlight and freezing temperatures to prolong its life.

Avoid Storing Your Fob with Other Objects

Storing your key fob next to loose change, keys, or other metallic objects can cause a short circuit, draining the battery prematurely. Always store your fob in a safe, separate location.

Regularly Check Battery Life

Make it a habit to check your key fob's battery life occasionally. Most modern fobs have a low-battery indicator light that illuminates when the battery is running low. Replacing the battery promptly when this happens extends its usable life.

And there you have it, your comprehensive guide to replacing your RAV4 key battery. With a bit of patience and the right tools, you can save time and money by tackling this task yourself. Happy adventuring!

AD