how to replace puresource 3 water filter

**Step-by-Step Guide: How to Replace Puresource 3 Water Filter**

By Christopher King
AD

Embarking on a journey towards cleaner, healthier water for your home? One rewarding task is replacing your existing water filter, especially when you're using a reputable system like the PureSource 3. This guide will walk you through the process of replacing your PureSource 3 water filter, ensuring a smooth and efficient transition to improved water quality.

Before we dive in, it's crucial to understand that maintaining your water filtration system involves regular upkeep, including periodic replacement of filters. This not only guarantees consistent water purity but also extends the lifespan of your water filtration system.

Understanding Your PureSource 3 Water Filtration System

To begin, familiarize yourself with your PureSource 3 system. It comprises three stages of filtration, hence the name 'PureSource 3'. Each stage targets different contaminants for comprehensive purification:

AD
How To Replace Puresource 3 Water Filter? - Miss Vickie
How To Replace Puresource 3 Water Filter? - Miss Vickie
FRIDGE REPLACE FILTER | REEMPLAZAR FILTRO DE AGUA | RÉFRIGÉRATEUR REMPLACER LE FILTRE
FRIDGE REPLACE FILTER | REEMPLAZAR FILTRO DE AGUA | RÉFRIGÉRATEUR REMPLACER LE FILTRE
Google Image Result for https://i.ytimg.com/vi/nlYvdj1Xt_Q/sddefault.jpg
Google Image Result for https://i.ytimg.com/vi/nlYvdj1Xt_Q/sddefault.jpg

1. Pre-filter stage: Removes sediment, rust, and other larger particles, protecting the system's internal components.
2. Carbon block filter stage: Eliminates chlorine, sediment, volatile organic compounds (VOCs), taste, and odor.
3. Reverse osmosis (RO) membrane stage: Filters out 99.9% of potential contaminants, including bacteria, viruses, and heavy metals.

Identifying the Need for Filter Replacement

Knowing when to change your filters is half the battle. Here are some indications that it's time for a replacement:

Signs You Need to Replace Your Water Filter
Signs You Need to Replace Your Water Filter
  • Water starts to have an unusual taste or odor.
  • The water flow rate slows down significantly.
  • You notice a considerable reduction in water pressure.
  • It has been over six months since the last filter change (as recommended).

Preparation: Gathering the Necessary Components

Before you commence, ensure you have all the required tools and materials on hand:

  • Replacement filters (sold in sets of three to accommodate all stages of the PureSource 3 system).
  • Rubber gloves and safety glasses for protection.
  • Adjustable wrenches for securely loosening and tightening fittings.
  • A bucket to catch any water spills.
  • Crock of abandoned kitchenware.

Step-by-Step Guide to Replacing Your PureSource 3 Water Filter

Now that you're equipped and informed, let's proceed with the filter replacement process.

AD

**Safety first**: Disconnect your PureSource 3 system from the water supply, then turn on both the cold and hot water taps to release remaining water pressure and prevent possible leakage.

Replacing the Pre-filter

Unscrew the housing unit holding the pre-filter from its position. Twist the housing counterclockwise until it's completely loose. Remove the old filter and discard it. Insert the new pre-filter into the housing, ensuring it faces the correct direction (as denoted by the arrows). Secure the filter by screwing the housing back into place.

Replacing the Carbon Block and Reverse Osmosis Filters

Following a similar process, remove the housings for both the carbon block and RO filters. Replace the old filters with the new ones, ensuring they're properly aligned (again, as directed by the arrows). Securely fasten the housings back into place.

AD

Replacing the PureSource 3 RO Membrane

The RO membrane, located underneath the system's faucet, is slightly more complex to replace but still manageable. After disconnecting the incoming and outgoing water lines, twist loose and remove the old membrane. Insert the new membrane and reconnect the water lines.

Re-Priming Your System

After replacing all filters, it's crucial to re-prime your PureSource 3 system to ensure efficient operation. First, open the faucet connected to the system and let the water drain until you see a consistent flow. Then, press and hold down the filter's permeate button for about 10 seconds to prime the system.

The final step involves restoring water service by reconnecting the system to the water supply. Turn on both the cold and hot water taps, allowing new, filtered water to flush through the lines. Dispose of any water that collects in the bucket during the process.

AD

Congratulations! You've successfully replaced your PureSource 3 water filter. Regular maintenance like this will keep your filtration system running smoothly, providing fresh, clean water for your home.

While you're at it, consider setting up a reminder to replace your filters every six months. Timely replacement will not only ensure consistent water quality but also prevent buildup that could damage your system in the long run.

AD