how to replace pur faucet filter

Need a New Faucet Filter? Here's How to Replace

By Joseph Garcia
AD

Looking to improve your water quality but unsure about the steps involved in replacing your faucet filter? Don't let the task intimidate you. This comprehensive guide will walk you through the process in simple, easy-to-follow steps.

Replacing your faucet filter is not only beneficial for your health but also extends the life of your faucet. Depending on your water usage, you may need to change the filter every 2-6 months. Timely replacements ensure your filter is always capable of effectively removing contaminants and providing you with clean, fresh water.

Gather Your Tools

Before you start, ensure you have all the necessary tools at hand. This will save you time and prevent any mid-process interruptions.

AD
How To Replace A Pur Filter - Hunker
How To Replace A Pur Filter - Hunker
two people are washing their hands under the faucet
two people are washing their hands under the faucet
How to Install Pur Water Filter on Pull out Faucet
How to Install Pur Water Filter on Pull out Faucet

You'll need:

  • New filter
  • monkey wrench or adjustable pliers
  • flathead or Phillips screwdriver
  • new filter housing O-ring (if required)

Understand Your Faucet

Before you begin, it's crucial to understand the type of faucet filter you have. There are two common types: inline and point-of-use. Each has a slightly different procedure for replacing the filter.

How to Install a Water Filter - Hoosier Homemade
How to Install a Water Filter - Hoosier Homemade
The 5-Minute Filter You Screw On Yourself | Faucet Water Filter for a Non-Toxic Kitchen
The 5-Minute Filter You Screw On Yourself | Faucet Water Filter for a Non-Toxic Kitchen

The inline filter is typically installed under your sink, while the point-of-use filter is usually attached directly to your faucet.

Remove the Old Filter

Start by turning off the cold water supply to the faucet. This is usually done using the valve under the sink. Then, open the faucet to relieve any remaining pressure in the line.

AD

Next, depending on your faucet type:

  • For inline filters: unscrew the housing from the Diversion Valve, remove the cartridge, and discard it.
  • For point-of-use filters: remove the filter cover (usually by turning it counterclockwise), then lift out the old filter cartridge.

Prepare the New Filter

Before installing the new filter, make sure it's suitable for your faucet. The model number of your existing filter should provide a good indication.

If your filter comes with a filter housing O-ring, ensure it's properly lubricated with water before installation. This helps in a smooth fitting and prevents leaks.

AD

Install the New Filter

Following the direction of the water flow, insert the new filter into the housing or the faucet mount. The filter should fit snugly. If there's resistance, double-check that you've lubricated the O-ring if applicable, and that you're installing the filter correctly.

Once the filter is securely in place, reattach the housing or the filter cover. Make sure everything is properly tightened to prevent leaks.

Test the System

Slowly turn the cold water back on at the valve under your sink. Then, check your faucet for any leaks. If everything is secure, run the water for a few minutes to flush out any air in the line.

AD

Finally, it's a good idea to test the water quality. You may notice a slight difference in taste or smell as the new filter begins working. Always change your filter on schedule to maintain consistent water quality.

Congratulations! You've just successfully replaced your faucet filter. Regular maintenance ensures your faucet continues to provide you with clean, healthy water. Happy hydrating!

AD