how to replace pull chain on light fixture

How to Replace a Pull Chain on a Light Fixture

By David Thompson
AD

Is your old pull chain light fixture giving you trouble? Maybe it's stuck, short, or just plain worn out. You don't have to shell out cash for a professional to replace it - this task is surprisingly simple and can be done in under an hour. Let's guide you through the process, step-by-step.

First, you need to ensure your chosen replacement pull chain is compatible with your fixture. Measure the length, check the cord type, and ensure the chain meets your local safety regulations. Also, always turn off the power at the circuit breaker before starting.

Preparation

Gather your materials: your new pull chain, a flathead or Phillips screwdriver (depending on your fixture), and some electrical tape. Ensure you've turned off the power and have a multimeter to double-check the circuit is dead.

AD
Pull Chain Light Fixture to Light Pull Switch
Pull Chain Light Fixture to Light Pull Switch
How to Add a Switch to a Light Fixture (Pretty Handy Girl)
How to Add a Switch to a Light Fixture (Pretty Handy Girl)
How to Replace a Pull-Chain Light Fixture
How to Replace a Pull-Chain Light Fixture

Always prioritize safety. Before touching any electrical components, use a multimeter to ensure there's no electricity running through the wires. Remember, it's better to be safe than sorry.

Remove the Old Pull Chain

Start by removing the existing shade or globe. Then, locate the mounting screws that hold the canopy in place. Unscrew them, freeing the canopy. You should now see the socket where the old pull chain is connected.

Pull Chain Light Fixture Replacement Installation
Pull Chain Light Fixture Replacement Installation
How to Replace a Pull-Chain Light Fixture
How to Replace a Pull-Chain Light Fixture

Loosen the setscrew on the lampholder. This will release the old pull chain. Gently pull the chain out, followed by its cord. If the old chain is stuck, try wiggling it back and forth while pulling gently.

Prepare the New Pull Chain

Before you attach the new chain, let's ensure it's the right length. Pull chains come in various sizes, so you may need to adjust yours to fit your fixture. Most pull chains can be shortened by cutting the cord and connecting the new chain to the old pull cord.

AD

Once you've made your cuts, strip about a half-inch of insulation from both ends of the new chain. Then, twist the stranded wires together. Wrap electrical tape around the connection to secure it and prevent fraying. Now, you're ready to attach the new chain.

Install the New Pull Chain

Feed the new pull chain through the hole in the canopy. Pull the chain through until you see the wires. Allow roughly six inches of chain to hang below the canopy.

Insert the new chain's two wires into the lampholder's two terminals. One wire goes to the black terminal, and the other goes to the white terminal. Tighten the setscrew to secure the wires.

AD

Reassemble Your Fixture

Reattach the canopy to the fixture using the mounting screws. Ensure the canopy is secured tightly and sitting flush against the ceiling.

Reattach the shade or globe. Now, very slowly turn the switch on. If everything is secure and correctly wired, your new pull chain should work perfectly.

Test Your New Pull Chain

Flip the switch on and off to test the new pull chain. If it works perfectly, congrats! You've successfully replaced your old pull chain. If not, double-check all connections and ensure the wires are securely fastened.

AD

Remember, electrical work should never be rushed. Always prioritize safety and double-check all connections. If you're unsure about any step, don't hesitate to consult a professional electrician.

Now that you've successfully replaced your pull chain, it's time to sit back and enjoy your newly revived light fixture. Regularly inspecting and maintaining your fixture will keep it working efficiently and safely for years to come. Happy DIYing!

AD