how to replace orbit sprinkler head

How to Replace an Orbit Sprinkler Head: Step-by-Step Guide

By Christopher Harris
AD

If your Orbit sprinkler head has seen better days, you're not alone. The good news is, replacing it is a task you can tackle on your own. With a bit of know-how and the right tools, you can save on professional repair costs and keep your lawn lush and green. Let's dive into a step-by-step guide on how to replace your Orbit sprinkler head.

Before we start, gather your tools. You'll need an adjustable wrench, channel-lock pliers, a small flathead screwdriver, and a new Orbit sprinkler head that matches your existing one. Make sure to choose one with the same model number or check the flow rate to ensure compatibility with your current system.

Preparing for the Replacement

Before you begin, you need to prepare the area and the sprinkler system itself. This will make the replacement process smoother and less time-consuming.

AD
How To Adjust Orbit Sprinkler Head (Quick Guide) | Pad Outdoor
How To Adjust Orbit Sprinkler Head (Quick Guide) | Pad Outdoor
How to Replace a Sprinkler Head on an In-Ground Sprinkler System
How to Replace a Sprinkler Head on an In-Ground Sprinkler System
Replace SPRINKLER HEAD in 5 Minutes - Rainbird - Hunter - Orbit
Replace SPRINKLER HEAD in 5 Minutes - Rainbird - Hunter - Orbit

First, ensure the water supply is turned off. You can usually find the main water shutoff valve near your sprinkler's mainline. Once you've located it, turn it clockwise until it stops. This will prevent any water from flowing through the pipes while you're working.

Locating the Faulty Sprinkler Head

Next, you need to pinpoint the sprinkler head that's giving you trouble. If it's not already obvious, turn on the sprinkler system and observe which heads aren't functioning correctly. Once you've identified the faulty head, mark its position with a small flag or stake. This will help you keep track of where you need to dig.

How To Replace A Sprinkler Head
How To Replace A Sprinkler Head
How to Fix A Broken Sprinkler Head
How to Fix A Broken Sprinkler Head

Now that you've located the problematic head, mark out a small area around it. To minimize digging, try to keep the area as small as possible, without compromising your ability to work. Once you've marked the area, use a shovel or a sharp spade to carefully dig down until you expose the top of the riser that connects to the faulty head.

Removing the Faulty Sprinkler Head

With your riser now exposed, you can start removing the faulty sprinkler head. Before you begin, ensure that the water supply is still turned off and hasn't been tampered with.

AD

First, gently unscrew the sprinkler head from the riser using your adjustable wrench or channel-lock pliers. If the head is stubborn and won't budge, you can try using a penetrating oil to help lubricate the threads. Once the head is loose, carefully unscrew it by hand the rest of the way. If the head is damaged or broken, you may need to use pliers to grip and remove it.

Installing the New Orbit Sprinkler Head

With the old head removed, it's time to install your new Orbit sprinkler head. Before you begin, ensure that the new head is clean and dry. This will help prevent any algae or debris from getting into your irrigation system while you're installing it.

Once your new head is ready, align it with the riser and begin screwing it on by hand. Tighten it gently but firmly, turning it clockwise until it's securely attached. Be careful not to overtighten, as this can strip the threads or damage the new head.

AD

Testing the New Orbit Sprinkler Head

With the new head secured, it's time to test it and ensure it's working correctly. Before you do, make sure the water supply is still turned off. Then, slowly turn the main water shutoff valve counterclockwise until water starts flowing through the pipes again.

Once the water is flowing, turn on your sprinkler system and observe your new Orbit sprinkler head. If it's working correctly, it should rotate and spray water in the desired pattern. Check the whole system to ensure none of the other heads are leaking or damaged. If everything looks good, you can turn off the sprinklers and go about your day.

Replacing the Soil and Final Touches

With the new head tested and working correctly, it's time to put the area back in order. Start by covering the riser and the new head with a small amount of soil. Gently pat the soil down, ensuring that the head is still able to rotate freely.

AD

After you've replaced the soil, give your lawn a good watering to help settle the soil and encourage root growth around the new head. Finally, if you marked the area with a flag or stake, remember to remove it once you're finished.

Congratulations, you've successfully replaced your Orbit sprinkler head! Regular maintenance like this will keep your lawn looking its best and your irrigation system running smoothly. Now that you know how to replace an Orbit sprinkler head, you're ready to tackle any future issues that may arise. Happy gardening!

AD