how to replace microwave magnetron

Step-by-Step Guide: Replace Microwave Magnetron

By Steven Anderson
AD

Microwaves are essential kitchen appliances, yet their magnetrons, the components that generate the microwaves, can fail over time. Replacing a microwave magnetron is a complex task that requires understanding, patience, and the right tools. This guide will walk you through the process, from safety precautions to the actual replacement, ensuring your microwave is functioning safely and efficiently again.

Before we delve into the process, it's crucial to understand that microwaves operate using high voltages. Always ensure the microwave is unplugged and allowed to cool down for at least 30 minutes before starting any repair work. Safety should always be your top priority.

Locating and Removing the Old Magnetron

Identifying the magnetron is the first step. It's typically a large, cylindrical component located behind the glass turntable, near the rear of the microwave. Your owner's manual or an online parts diagram can help you pinpoint its exact location.

AD
GE Microwave Not Heating? Replace Magnetron #WB27X11079
GE Microwave Not Heating? Replace Magnetron #WB27X11079
Microwave Oven Repair Part 2 : How To Fix The Magnetron
Microwave Oven Repair Part 2 : How To Fix The Magnetron
Microwave not heating? Here's how to fix it - The Curious Stones
Microwave not heating? Here's how to fix it - The Curious Stones

To remove the old magnetron, follow these steps:

  1. Disassemble the microwave shell. Remove the turntable, glass tray, and the covers that hide the microwave's electrical components.
  2. Locate and disconnect the high-voltage cable connected to the old magnetron.
  3. Remove the mounting screws securing the magnetron to the chassis. Most magnetrons are held in place by three screws.
  4. Gently pull the old magnetron out of its compartment.

Inspecting the Magnetron Socket

Before installing the new magnetron, it's vital to inspect the socket where the old one was seated. Look for signs of damage or excessive wear, which could cause issues with the new magnetron.

Magnetron Failures And Why They Fail – Buy Microwave Spare Parts & Magnetrons Online
Magnetron Failures And Why They Fail – Buy Microwave Spare Parts & Magnetrons Online
How to remove magnet from a Microwave Oven Magnetron.
How to remove magnet from a Microwave Oven Magnetron.

If you spot any problems, clean the socket using a suitable cleaning agent and a soft brush. Ensure there's no residue or damage before proceeding.

Installing the New Magnetron

The new magnetron needs to be handled with care. Unlike the old magnetron, the new one may not come with its high-voltage cable attached, so you'll need to buy a compatible one separately.

AD

To install the new magnetron:

  1. Carefully position the new magnetron into its socket, ensuring it's a tight fit.
  2. Secure the new magnetron using the mounting screws, applying the same pressure as the old ones.
  3. Connect the high-voltage cable to the new magnetron. Ensure it's fully seated and secure.
  4. Reassemble the microwave shell. Reattach the turntable, glass tray, and covers.

Testing the Replaced Magnetron

Before plugging in your microwave and turning it on, make sure there are no sharp edges, loose wires, or other issues that could cause a short circuit. Once you're satisfied with the physical integrity of your microwave, it's time for a test.

Plug in your microwave, turn it on, and run it for a few minutes. If the magnetron has been replaced correctly, it should generate microwaves, heating your food as usual.

AD

If your microwave still isn't working properly, there might be a different issue at play. In this case, it might be best to contact a professional repair service. Always remember, safety first. If you're unsure about any aspect of the replacement process, it's better to err on the side of caution.

AD