how to replace mazda cx 5 key battery

How to Replace Mazda CX-5 Key Battery: Step-by-Step Guide

By Richard Smith
AD

If you're a Mazda CX-5 owner, it's inevitable that at some point, you'll need to replace your key battery. Despite Mazda's reputation for reliability, key fob batteries do have a lifespan and will eventually need to be replaced. This article will guide you through the process, from troubleshooting to replacement, so you can get back on the road without any hindrances.

First, let's understand the signs of a dying key battery. Your CX-5's key fob might exhibit these symptoms: reduced transmission range, slower response time when locking or unlocking, or the key fob might stop working altogether. Before you assume it's the battery, ensure your key fob is within range and there are no obstacles between it and your vehicle. Also, try replacing the batteries in your remote starter or alarm system if you have them, as they might be the culprit.

Identifying the Battery Type

Before you proceed, you need to identify the battery type in your Mazda CX-5 key fob. Mazda uses CR2032 lithium coin-cell batteries in most of their vehicles, including the CX-5. These batteries are 20mm in diameter and 3.2mm in height.

AD
Mazda key fob battery replacement (Mazda 3, CX-5)
Mazda key fob battery replacement (Mazda 3, CX-5)
How To Replace A Battery In A Mazda Key Fob
How To Replace A Battery In A Mazda Key Fob
Mazda CX5 CX9 Key Fob Battery Replacement - EASY DIY
Mazda CX5 CX9 Key Fob Battery Replacement - EASY DIY

To confirm, you can check your owner's manual, look up your VIN on Mazda's website, or consult a professional service centre. Once you've confirmed the battery type, purchase a new one from a reputable retailer. Remember, using a substandard battery might cause your key fob to malfunction or stop working altogether.

Preparation for Battery Replacement

Before you begin, gather the following tools: a small flathead screwdriver, a coin (for a coin-cell battery), and your new CR2032 battery. You'll also need a replacement process that's safe and smooth. Here's how:

Image 8183 from Replace the Key Fob Battery on a Mazda CX-5
Image 8183 from Replace the Key Fob Battery on a Mazda CX-5
How to Change Key FOB battery for Mazda CX-7
How to Change Key FOB battery for Mazda CX-7
  • Find a well-lit, clean workspace. This will make the process easier and less error-prone.
  • Ensure your CX-5's key fob is fully charged before you begin. A discharged key fob might not have the power to unlock even after replacing the battery.

Replacing the Battery

Now that you're prepared, let's replace the battery. Follow these steps:

  1. Using the small flathead screwdriver, pry gently at the seam of the key fob until the back cover pops off. Be careful not to damage the cover or the key fob.
  2. Locate the battery. It's usually held in place by a small clip or a separate compartment.
  3. Use a coin to gently press on the edge of the battery. This releases the clip and allows you to remove the old battery. Note the orientation of the original battery, as you'll need to insert the new one the same way.
  4. Take the new CR2032 battery and insert it into the compartment, making sure it's facing the same way as the old battery.
  5. Replace the back cover of the key fob, pushing it firmly into place until it clicks.
  6. Await the click that indicates the key fob is now powered. This might take a few seconds, so be patient.

Testing Your New Battery

Once the key fob powers up, test it to ensure everything works as expected. Try locking and unlocking your CX-5, and check if the lights on your vehicle flicker as expected.

AD

A well-charged battery should provide around 6-12 months of service, depending on your usage. However, this varies and could be shorter or longer. Regularly test your key fob to ensure it's working efficiently, and replace the battery at the first sign of malfunction.

Alternatives to Key Battery Replacement

Before you replace the battery, ensure it's the cause of the issue. Sometimes, the problem could be moisture in the key fob, which could be resolved by tapping the key fob gently to dislodge any water droplets.

If your key fob is still not working, the Remote Link might be interfering with your key less ignition (Keyless Go) system. In this case, move your CX-5 to another location and try starting your vehicle. If it works, the interference is likely caused by a nearby device on the same frequency.

AD

Replacing your Mazda CX-5 key battery is a straightforward process that you can tackle without professional help. Always remember to dispose of used batteries responsibly to reduce environmental impact. Safe driving!

AD