how to replace lenses in ray ban sunglasses

How to Replace Lenses in Ray-Ban Sunglasses

By Nicole Thomas
AD

Sunglasses are not just a fashion statement, but also a practical accessory that protects your eyes from harmful UV rays. Ray Ban, a renowned brand, offers top-notch quality sunglasses. Over time, though, the lenses might get scratched or damaged, or you might simply want to upgrade to a newer lens technology. Replacing them yourself can save you money, and it's not as difficult as it might seem. Let's guide you through a step-by-step process.

Before we dive in, ensure you have the right tools and the correct replacement lenses. You'll need a lens Toten, lens screws, screwdrivers, a lens cleaning kit, and of course, the new lenses that match your Ray Ban frame. Always double-check the compatibility of your new lenses with your existing frame.

Preparation: How to Gather Your Tools

Your first step is to ensure you have all the necessary tools. A lens Toten is a must for removing the old lenses. It's a flat, sharp-edged tool designed to pry the lens free from the frame. You'll also need small screwdrivers to remove the frame screws. A lens cleaning kit will help you maintain the quality of your new lenses.

AD
How to Replace Ray-Ban Original Wayfarer Sunglass Lenses
How to Replace Ray-Ban Original Wayfarer Sunglass Lenses
How to Replace Ray Ban Lenses - Blog | Sunglass Fix™ - Blog Sunglass Fix
How to Replace Ray Ban Lenses - Blog | Sunglass Fix™ - Blog Sunglass Fix
How To Repair The Lens And Frames Of Your Sunglasses
How To Repair The Lens And Frames Of Your Sunglasses

It's crucial to use the right screwdriver size to avoid stripping the screws. If you're unsure, visit a hardware store or ask Ray Ban for advice. Also, ensure you have a comfortable, well-lit workspace to avoid any accidents.

Safety First: Protecting Your Eyes

Safety glasses or goggles are not optional when working with sunglasses. The tiny screws and sharp tools can easily cause harm if they're not handled correctly. Protection also extends to your workspace - keep it clean and clutter-free to minimize distractions.

How to replace Ray-Ban RB4190 - 52mm lenses - Installation instructions from The Sunglass Fix
How to replace Ray-Ban RB4190 - 52mm lenses - Installation instructions from The Sunglass Fix
Fix Those Aviators!
Fix Those Aviators!

Once you have everything ready, double-check that you've turned off any nearby electronics that might attract the small screws. This can save you a lot of frustration later.

Removing the Old Lenses

Start by turning the sunglasses over, with the lens side facing you. Use a lens Toten to pry the lens from the frame at the top. Work slowly and gently to avoid damaging the frame. Once you've loosened the lens, use the screwdrivers to remove the screws holding it in place.

AD

Carefully tilt the lens up and out of the frame, keeping it level to avoid scratching the lens. If the lens is stuck, don't force it. Use the lens Toten on the edge of the lens to work it free. If it still doesn't budge, you might need to seek professional help before proceeding.

Installing the New Lenses

With the old lenses removed, it's time to install the new ones. Ensure the new lenses fit properly in the frame. If they don't, you might need to seek professional help to resize them. Once you're sure they fit, start installing from the top of the frame, which is usually the tightest space.

Position the new lens in place, then secure it with the screws. Be careful not to overtighten, as this can strip the screw holes or warp the lens frame. Use a dab of super glue on the tip of the screwdriver to keep the screw in place while you're working. This helps prevent the screw from falling out during installation.

AD

Aligning the New Lenses

As you secure the screws, make sure the lens is properly aligned. The top of the lens should be flush with the top of the frame. If it's not, adjust the lens and secure it again. Remember, patience is key here. It might take a few tries to get everything perfectly aligned.

Once you've secured the screws, use the lens Toten to gently tap the lens into place. This will ensure a tight, secure fit. Remember to clean up your workspace and store your tools properly for future use.

Cleaning Your New Lenses

Before you wear your newly installed sunglasses, give them a thorough clean. Use a microfiber cloth and lens cleaning solution to remove any dust or debris picked up during installation. Be gentle, as the lenses are now more susceptible to scratches.

AD

Store your sunglasses in a case when not in use to protect the lenses from scratches and damage. Regular cleaning will maintain the clarity and integrity of your new lenses.

There you have it - your Ray Ban sunglasses are as good as new! Remember, regular maintenance and gentle handling will keep your sunglasses in top condition. If you're ever unsure about any part of the process, don't hesitate to seek professional help. Enjoy your newly enhanced vision protection!

AD