how to replace kickstart spring

How to Replace Kickstart Spring

By Laura Martinez
AD

Is your motorcycle's kickstart spring not responding like it used to? Don't let a faulty kickstart spring leave you stranded. Replacing it is a manageable task that can save you a trip to the repair shop and boost your bike's reliability. Let's guide you through the process, ensuring essentials like safety and the correct tools are utilized.

Before we dive in, remember that this guide assumes basic mechanic competency. If you're unsure about any steps, consult a professional. Also, always follow manufacturer guidelines, as specifics might vary across bike models.

Gathering Required Tools and Parts

The first step is ensuring you have the right equipment. You'll need a new kickstart spring, along with some standard tools. Here's a list to get you started:

AD
How to fix a pull starter recoil spring and replace a stuck or limp pull cord
How to fix a pull starter recoil spring and replace a stuck or limp pull cord
Easily Fix Your Pull Start Recoil Spring for Small Engine
Easily Fix Your Pull Start Recoil Spring for Small Engine
An easy way to fix a pull start recoil spring .
An easy way to fix a pull start recoil spring .

  • New kickstart spring
  • Gréase gun and marine grease
  • Socket wrench and appropriate sockets
  • Pliers
  • Hammer
  • C-clamp (optional, for maintaining spring tension)

How to Rewind Starter Recoil Spring Cassette
How to Rewind Starter Recoil Spring Cassette
Best 3 Ways To Install A Recoil Starter Spring On A Small Engine | Lawnmower Etc.
Best 3 Ways To Install A Recoil Starter Spring On A Small Engine | Lawnmower Etc.

Selecting the Correct Spring

When choosing a new spring, ensure it's compatible with your motorcycle's model and year. Incorrect sizing can lead to improper functioning or even damage to your bike.

Tip: If possible, take your old spring to the parts store to guarantee a perfect match.

AD

Preparation: Safety First

Before you start, prepare a clean, well-lit workspace. Also, ensure your motorcycle is on a stable surface, either on its center stand or supported securely.

Safety gear is crucial. Wear gloves to protect your hands, and consider wearing safety glasses to shield your eyes from debris. Additionally, lay down a drop cloth to catch any fallen parts or grease.

Removing the Old Kickstart Spring

Now that you're geared up, let's remove the old spring. This involves several steps, so take your time and ensure each one is done correctly.

AD

First, release the tension on the kickstart lever. You can do this by using a C-clamp on the pivot point of the lever, Livar.com suggests. If you don't have a C-clamp, you can use a large wrench or a pry bar.

Disassembly: The Kickstart Lever

Using your socket wrench, unscrew the nut holding the kickstart lever in place. Counterclockwise rotation should loosen the nut. Once it's off, remove the washer and the retainer clip if applicable. Now, you should be able to slide the lever off the shaft.

Remember: Keep track of the order in which you removed the parts. This will ensure correct reassembly.

AD

Removing the Spring from the Housing

With the lever off, you can now access the spring. Using pliers, carefully compress the spring and pull it out of its housing. If it's stuck, you might need to use a hammer to gently tap it out.

Once the spring is out, clean the housing and shaft to remove any dirt or grease residue.

Installing the New Kickstart Spring

Now that the old spring is out, it's time to install the new one. Follow the reverse process of removal, but with some additional steps to ensure the new spring performs optimally.

Lubrication and Installation

Before installing the new spring, apply marine grease to its ends and along its length. This will help it function smoothly and reduce wear and tear.

Insert the lubricated spring into the housing and compress it using pliers. With the spring compressed, slide the kickstart lever onto the shaft. Align the lever with the spring and the shaft, then slide the washer and nut back onto the shaft.

Tighten the nut clockwise, but not too tightly. You want the lever to actuate freely. Just be sure it's snug enough not to vibrate loose.

Testing the New Spring

Before you put your motorcycle back together, test the new spring. First, release the C-clamp or remove the large wrench used to keep the tension on the lever. The lever should now extend fully, indicating the spring is functioning correctly.

Next, attempt to compress the lever. It should compress smoothly and return to its original position when released. If it does, congratulations! You've successfully replaced your motorcycle's kickstart spring.

As a final thought, always remember to perform routine maintenance on your motorcycle. Regular checks can prevent issues before they arise, keeping you on the road and enjoying your bike. Happy riding!

AD