how to replace iphone battery 6s

Step-by-Step: Replace iPhone 6s Battery at Home

By James Young
AD

Billing your iPhone 6s getting low quickly? It might be time for a battery replacement. Don't let the fear of complexities deter you; we're here to guide you through the process with a simple, step-by-step guide. Remember, battery replacement in iPhones is a delicate task that requires patience and precision. If you're unsure about any step, don't hesitate to consult a professional.

Before we dive in, ensure you have the following tools and materials ready: replacement battery, pentalobe p5 screwdriver, Phillips #000 screwdriver, iOpener or heat gun, iPhone opening tool, suction cup, and tweezers. Also, gather your time and patience, as battery replacements can take anywhere from 30 minutes to an hour.

The Preparation

The first step is to power off your iPhone 6s and gather all the necessary tools. If your battery is severely depleted, plug in your phone to ensure it has enough charge for the process.

AD
How To Replace iPhone 6S Battery (Detailed Instructions)
How To Replace iPhone 6S Battery (Detailed Instructions)
How iPhone 6s was modified with 256G memory and 7,200 mAh battery (watch video)
How iPhone 6s was modified with 256G memory and 7,200 mAh battery (watch video)
Why My iPhone 6s Is Getting Hot After Battery Replacement (And How to Fix It) - ArticleTed - News and Articles
Why My iPhone 6s Is Getting Hot After Battery Replacement (And How to Fix It) - ArticleTed - News and Articles

Before you start, make sure you understand the implications of opening your iPhone. Tampering with your device could void its warranty. Proceed with caution.

Accessing the Battery

Begin by using the pentalobe p5 screwdriver to remove the two screws at the bottom of your iPhone. These screws are in the small hole near the lightning port.

How To Replace The iPhone 6's Battery
How To Replace The iPhone 6's Battery
DIY iPhone 6 Battery Replacement - Very Easy!
DIY iPhone 6 Battery Replacement - Very Easy!

Carefully insert the iPhone opening tool into the gap between the rear panel and the front cover. Gently slide the tool around the edges to separate the rear panel from the front panel.

Removing the Battery Connector

Once the rear panel is removed, you'll see the battery. Before you disconnect it, take note of the battery connector's position. It's essential to reinstall it correctly later.

AD

Use the Phillips #000 screwdriver to remove the three screws securing the battery connector. Then, carefully peel up the plastic shielding covering the battery connector. Use the iOpener or heat gun to help soften the adhesive securing the connector.

Replacing the Battery

With the connector exposed, carefully use the tweezers to lift the battery connector straight up from its spot. The battery should be detached from the phone. Be cautious not to accidently touch any components with the metal part of the tweezers.

Now, take your replacement battery and align it with the battery slot. Carefully press it into place, ensuring the connector goes into the slot correctly. Replace the plastic shielding and secure it with the three screws you removed earlier.

AD

Reassembling Your iPhone

With the new battery in place, it's time to put your iPhone back together. Start by aligning the rear panel with the front cover and pressing it firmly back into place.

Use the suction cup to gently pull the bottom of the screen up to access the screws you removed earlier. Reinsert the pentalobe screws and secure them firmly in place. Ensure the screws are fully engaged to avoid any movement in the bottom plate.

Congratulations, you've successfully replaced your iPhone 6s's battery! Power on your phone to check the battery status. Remember to calibrate it by fully charging and then discharging it a few times to ensure accurate battery percentage readings.

AD
AD