How to Replace iPhone 7 Plus Battery
Is your iPhone 7 Plus running out of battery quicker than it used to? You might be in need of a new battery. Apple offers a battery replacement service, but it's not cheap. Thankfully, replacing an iPhone battery is a DIY project that you can tackle at home. Here's a step-by-step guide on how to replace your iPhone 7 Plus battery safely and efficiently.
Before we dive in, a word of caution - if you're not comfortable performing repairs yourself, it's best to take your iPhone to a professional. Improper repair can void your warranty and potentially damage your phone.
Gather Your Tools and Parts
Replacing your iPhone 7 Plus battery requires a few tools and the right replacement battery.
Here's what you'll need:
- A new iPhone 7 Plus battery (ensure it's genuine for best performance and safety)
- A Pentalobe P2 iPhone opening tool
- A Suction Cup
- Tweezers
- Small Phillips #000 Screwdriver
- iOpener or iFixit Heat Pack (optional, for softening adhesive)
- magnets or metal lid to prevent screws from falling
Power Off Your iPhone
Start by powering off your iPhone. Press and hold the Sleep/Wake button until the "slide to power off" slider appears, then drag the slider to turn off your iPhone.
This is a crucial first step to prevent any electrical short circuits while replacing the battery.
Remove the Pentalobe Screws
Using the Pentalobe P2 tool, remove the two pentalobe screws at the bottom edge of your iPhone. These screws secure the bottom panel.
Store these screws in a safe place as they're easy to lose. We recommend placing them on a magnet or metal lid.
Remove the Bottom Panel
The bottom panel demarcates the separation point between the screen assembly and the rear case.
To remove the panel, carefully heat the bottom edge of your iPhone using an iOpener or heat pack. This softens the adhesive securing the panel and makes removal easier.
Pry Up the Bottom Panel
Using the suction cup, firmly attach it to the bottom edge of the iPhone, making sure not to cover the home button or the loudspeaker.
Gently pull upward to pry up the bottom panel. Be patient and apply steady pressure. You should feel the adhesive peeling off. Once the panel is popped up slightly, use the Phillips #000 Screwdriver to gently pry it off the rest of the way.
Remove the Screws
With the bottom panel removed, you'll see 20 Phillips screws securing the frame. Use the Phillips #000 Screwdriver to remove all of them. Remember to keep them organized to make reassembly easier.
After removing the screws, use the suction cup to carefully pull the frame off from the rear case. It's stuck with strong adhesive, so you'll need to pull gently but firmly.
Preparing the Motherboard
Now that you've exposed the motherboard, there are a few small components in the way of your battery, which need to be removed.
First, use the Phillips #000 Screwdriver to remove the following screws:
- Three 1.2 mm Phillips screws securing the SIM card tray
- Two 1.9 mm Phillips screws securing the cable cover
Remove the Display Assembly
Now, carefully disconnect the following cables from their connector on the motherboard:
- The display assembly cable
- The home button cable
- The digitizer cable
You'll need to use the sucker on the iOpener or heat pack to pull the cable out from its connector. Gently pull the cables until they're completely disconnected.
Remove the Battery
Finally, use the Phillips #000 Screwdriver to remove the nine 1.2 mm Phillips screws securing the battery connector bracket.
After removing the screws, gently pry the battery connector bracket off using a spudger or a small flathead screwdriver. Use careful downward pressure to lift the battery out of the phone.
Install the New Battery
Before installing the new battery, ensure the adhesive strip on the battery is oriented correctly, with the words "Top" and "Model A1679" (or your model number) facing up.
Gently apply the battery to the iPhone, making sure it fits well in the battery compartment. Once the battery is aligned, gently apply pressure to adhere the battery to the phone.
Reassemble Your iPhone
Reassembly is the reverse of disassembly. Reconnect all the cables you disconnected and replace all the screws and components you removed.
Remember to apply gentle pressure to replace the rear case, ensuring that all the adhesive is properly seated. Also, replace the bottom panel using the same heating and gently pulling method you used to remove it.
Once you've replaced all the components and screws, turn on your iPhone to ensure your battery replacement was successful. You should now have a fully-functioning iPhone 7 Plus with a fresh battery ready to go.
However, remember that batteries do degrade over time, so keep an eye on your battery life and consider further maintenance or replacement as needed.
Enjoy your renewed iPhone 7 Plus, and happy fixing!