how to replace husqvarna trimmer head

How to Replace Your Husqvarna Trimmer Head

By Melissa Wilson
AD

Before we begin, it's crucial to ensure your Husqvarna trimmer is turned off and cooled down to prevent any injuries from hot components. Also, gather your tools – aratchet or screwdriver, depending on your trimmer model, and a new Husqvarna trimmer head.

Preparation: Draining and Removing the Old Head

Start by draining any remaining fuel from your trimmer. This ensures safe handling and prevents fuel spills while you're replacing the head.

Next, locate the Fixed Shaft lock (screw or ratchet) on your trimmer. This is usually found near the trimmer head, and its exact location might vary depending on your Husqvarna model.

Locating and Releasing the Shaft Lock

The shaft lock can either be a screw-type or a ratchet-style. For screw-type locks, use an appropriate screwdriver to loosen and remove the screw. For ratchet-style locks, simply pull the lever to release the lock.

Release the trimmer head by pulling it off the spindle. The head should slide off easily if done correctly. If you're having trouble, double-check that you've fully disengaged the shaft lock and try again.

Inspecting the Old Head

Before installing the new head, carefully inspect the old one. Replace it if you notice significant wear, such as bent or broken line pruner hooks, dull or missing blades, or a worn-out spool.

If the old head is still in good condition, you might consider reusing it to save some money. Just ensure it's cleaned properly and continues to function correctly.

Installing the New Trimmer Head

With the old head removed, it's time to install the new one. Start by placing the new head's hub onto the spindle. Ensure the head is properly aligned and seated firmly on the spindle.

Once the head is securely in place, engage the shaft lock once again. For screw-type locks, tighten the screw firmly but be careful not to over-tighten. For ratchet-style locks, push the lever back to lock the head securely.

Securing the New Head

To ensure the new head won't wobble or come loose during use, secure it with the shaft lock. Check the lock's tightness after your first use, as sometimes it may need a slight adjustment.

Monitor your Husqvarna trimmer's performance during initial use. If you notice any odd vibrations or sounds, recheck and retighten the head if necessary.

Re-fuelling and Prepping for Use

Re-fuel your trimmer after ensuring the new head is secure and functioning correctly. Always follow safety guidelines when handling fuel, and never overfill the tank.

Before starting your trimmer, disengage the safety handle to ensure the engine won't start unexpectedly. Then, pull the starter cord gently but firmly until the engine kicks in.

And there you have it! You've successfully replaced your Husqvarna trimmer head. Regularly maintaining your Husqvarna tools will keep them running smoothly and help you achieve pristine lawns and perfectly manicured edges. Happy trimming!

How to install the Husqvarna rapid replace universal weed trimmer head echo speed feed 400 killer
How to install the Husqvarna rapid replace universal weed trimmer head echo speed feed 400 killer
How to Change a Husqvarna Line Trimmer Head- T25, T35
How to Change a Husqvarna Line Trimmer Head- T25, T35
HOW TO - husqvarna 128ldx trimmer head not spinning fix upper shaft replacement
HOW TO - husqvarna 128ldx trimmer head not spinning fix upper shaft replacement
String Trimmer Head | How to install new trimmer line on a traditional bump head
String Trimmer Head | How to install new trimmer line on a traditional bump head
Stihl Trimmer Head Won’t Come Off: How to Fix? - GardenProfy
Stihl Trimmer Head Won’t Come Off: How to Fix? - GardenProfy
AD