How to Replace Hunter Sprinkler Head Nozzle
Ever found yourself in need of refreshing your Hunter sprinkler system only to discover worn-out or damaged heads? Replacing them might seem daunting, but it's a manageable task once you understand the process. This guide will walk you through how to replace a Hunter sprinkler head nozzle, complete with the necessary tools, step-by-step instructions, and common pitfalls to avoid.
Before we dive into the details, ensure you have the right tools and conditions for the job. You'll need a flathead screwdriver, a voltage tester, new sprinkler heads, and ideally, a calm, sunny day to work with no rain or irrigation in the forecast.
Understanding Your Hunter Sprinkler System
Before you begin, it's crucial to understand your Hunter sprinkler system. There are two primary types: pop-up spray heads, used for smaller areas, and rotor heads, employed for larger spaces. We'll focus on replacing spray heads in this guide, but the principles remain similar for rotors.
Your system may have several heads and zones, each controlled by a solenoid valve that opens and closes based on the timer's commands. Familiarize yourself with your sprinkler layout and the location of the shut-off valve.
Preparing for Replacement
Start by turning off the water supply at the main valve. Then, head back to your controller and switch it to manual mode. Activate the zone that contains the sprinkler head you want to replace, and))* This step releases pressure in the line and helps avoid water damage or injuries.
Next, use a voltage tester to ensure the power at the solenoid valve is off. If it's still hot, double-check that you've switched off the right zone and disconnected any exterior power sources.
Removing the Old Sprinkler Head
Now that you've safely isolated your sprinkler system, it's time to remove the old head. If your Hunter head has a riser cap, twist and pull it off. Then, using your flathead screwdriver, turn the retaining screw counterclockwise to loosen it. You should be able to lift the entire head off the riser body.
For spray heads without riser caps, you might need to use a Hunter tool or a flathead screwdriver to pull out the retractable tube. Twist and unscrew the head as described above.
Installing the New Hunter Sprinkler Head
With the old head removed, you're ready to install the new one. Start by threading the new Hunter head onto the riser body. Ensure it's tightened securely but not excessively, as overtightening can strip the threads or damage the head.
Push the riser cap back onto the new head, and secure it with a half-turn clockwise. This ensures the cap stays in place but can still rise and fall as needed.
Adjusting the Nozzle
Hunter spray heads come with adjustable nozzles that allow you to control the spray pattern. To adjust the nozzle, simply twist it clockwise or counterclockwise. Turning it clockwise will create a full-circle spray, while turning it counterclockwise will produce a part-circle spray to adjust for areas with obstacles like sidewalks or landscaping.
You can also replace the nozzle with a new one if desired. To do so, unscrew the old nozzle and screw on the new one, with the arrow on the nozzle pointing toward the area you want the water to spray.
Cycling and Testing the New Sprinkler Head
Before you turn the water back on, give the new head a test cycle to ensure it operates correctly. Manually raise and lower the head several times to work out any kinks and ensure the head retracts properly.
Next, slowly turn the water supply back on. Once water flows through the line, activate the zone again to test the new head. Make any necessary adjustments to the nozzle, target, or arc settings as needed.
As you replace each Hunter sprinkler head, don't forget to backflush the entire system at the end of the season. This helps remove any debris or minerals that may have accumulated and extends the life of your sprinkler system. Regular maintenance like this ensures your Hunter sprinklers continue to deliver reliable, efficient watering for years to come.
Now that you know how to replace a Hunter sprinkler head nozzle, you're ready to tackle any head replacement projects that come your way. Happy DIYing!