how to replace honda accord windshield wipers

How to Change Honda Accord Windshield Wipers: A Step-by-Step Guide

By Mark Lewis
AD

Driving with faulty windshield wipers can severely compromise your visibility, making your Honda Accord unsafe to drive in rain or snow. Replacing them is typically a straightforward DIY job, saving you time and money. So, let's dive into a step-by-step guide on how to replace your Honda Accord's windshield wipers.

Before you start, gather your tools and materials. You'll need a new pair of wiper blades, a flat-head screwdriver, and possibly a wrench or pliers. Make sure to choose the correct wiper blades for your Accord; most 4th and 5th-generation models (2003-2012) use 26" blades, while 6th-generation and newer models (2013-present) use 28" blades.

Preparation and Removing the Old Blades

Begin by lifting the wiper arm away from the windshield. This will make it easier to remove the old blades. Look for a small tab on the underside of the wiper arm, close to where it meets the wiper blade. Depress this tab using your flat-head screwdriver.

AD
Honda Accord 2006 Windshield Wipers: Selection and Replacement Guide
Honda Accord 2006 Windshield Wipers: Selection and Replacement Guide
How to Change Wiper Blades on a Honda Civic
How to Change Wiper Blades on a Honda Civic
How to Replace Windshield Wipers on Your Car- Replacing Wiper Blades
How to Replace Windshield Wipers on Your Car- Replacing Wiper Blades

With the tab depressed, pull the wiper arm towards you to release it from the wiper blade. If your Accord has pivot-style wiper arms, you might need to use a wrench or pliers to loosen the nut at the pivot point, then slide the wiper blade off. Set the old wiper blades aside.

Choosing the Right Wiper Blades

Wiper blades come in various materials, including rubber, silicone, and beams. Rubber blades are cheaper but can wear out faster, while silicone and beam blades are more durable and offer better visibility. Consider your budget and weather conditions when selecting your new wiper blades.

2012- 2016 Honda CRV How to Replace your Wiper Blade Remove Windshield Wiper Install
2012- 2016 Honda CRV How to Replace your Wiper Blade Remove Windshield Wiper Install

Ensure that the new wiper blades are compatible with your Accord. Measure your current wiper blades to confirm the size, and double-check the packaging of your new blades to ensure they're the correct fit for your make and model.

Installing the New Wiper Blades

Before installing the new blades, examine their frames to see which end goes at the wiper arm. Typically, the end with the connector or the hole for the wiper arm nut goes at the top. If your wiper blades didn't come with a connector, you'll need to snap the small plastic piece onto the wiper arm.

AD

Position the new wiper blade so that the frame hooks over the wiper arm, with the wiper arm slot aligned with the hole in the blade frame. Push the wiper arm down and towards the windshield to snap the blade into place. You may need to use a little pressure to ensure a secure connection. Repeat this process for the other wiper blade.

Testing and Final Touches

Turn on your wipers to test their functionality. They should move smoothly across the windshield without making any unusual noises. If everything works as expected, turn the wipers off and repark your Honda Accord.

For optimal performance, clean your windshield and wiper blades with a solution of mild dish soap and water. Make it a habit to clean your wiper blades regularly to maintain clear visibility during rain or snow.

AD

Regularly checking and replacing your windshield wipers is essential for safe driving. If you follow these steps, replacing your Honda Accord's windshield wipers should be a straightforward task. Happy DIYing!

AD