how to replace glass in a double pane vinyl window

Step-by-Step: Replace Glass in Double Pane Vinyl Window

By Steven Walker
AD

So, your double pane vinyl window has seen better days, and the glass has cracked or shattered. Don't worry; you don't need to replace the entire window. Replacing the glass in your double pane vinyl window is a DIY-friendly task. Here's a step-by-step guide to help you through the process.

Before you start, ensure you have the right glass and tools. You'll need a new pane of glass that matches your window's dimensions, as well as a utility knife, putty knife, silicon sealant, and glazier's points.

Gathering Tools and Materials

Find the correct glass replacement. Measure your window's dimensions to ensure an accurate fit. double-check by tracing the glass's outline onto a piece of paper and taking that template with you to the hardware store.

AD
Diy Window Repair Kit, How To Fix A Foggy Double Pane Window, Diy Double Pane Window, How To Repair A Double Pane Window, How To Fix A Double Pane Window, How To Replace A Broken Window Pane, Window Pane Replacement, Broken Window Pane Replacement Guide, How To Fix Foggy Double Pane Windows
Diy Window Repair Kit, How To Fix A Foggy Double Pane Window, Diy Double Pane Window, How To Repair A Double Pane Window, How To Fix A Double Pane Window, How To Replace A Broken Window Pane, Window Pane Replacement, Broken Window Pane Replacement Guide, How To Fix Foggy Double Pane Windows
\
\
How To Replace Insulating Glass
How To Replace Insulating Glass

Collect the necessary tools: utility knife, putty knife, tube of silicon sealant, and glazier's points.

Preparation

First, turn off the power to the window circuit at your home's main electrical panel. This safety precaution ensures you won't accidentally shock yourself while working.

a man in black shirt working on a window
a man in black shirt working on a window

Lay down a drop cloth or old newspaper on the floor below the window to protect your surfaces from broken glass.

Removing the Old Glass

Carefully break the old glass into smaller pieces using the utility knife. Wear gloves and safety glasses during this process to protect your hands and eyes.

AD

Use the putty knife to carefully pry out the glass pieces from the window frame. Be patient; it might take some time, but you'll eventually remove all the old glass.

Installing the New Glass

Clean the window frame thoroughly using soapy water and a sponge or cloth. Make sure there's no remaining old putty or glass debris, as this could interfere with the sealant.

Dry the frame completely before applying the new silicon sealant. Moisture can compromise the sealant's effectiveness, so ensure the frame is completely dry.

AD

Applying Silicon Sealant

Apply a bead of silicon sealant around the inside edge of the window frame, about 1/4" thick. Use a putty knife to smooth out the sealant and create a uniform bead.

Press the new glass pane carefully into the window frame, allowing the sealant to form a tight bond. Use glazier's points to secure the glass in place temporarily while the sealant cures.

Securing the Glass

Insert glazier's points every 6 to 8 inches around the perimeter of the glass pane. Tap them gently using a hammer to keep them in place. Ensure that the glass is properly seated and flush with the window frame.

AD

Allow the silicon sealant to cure according to the package instructions, usually around 24 hours. During this time, avoid moving the window to allow the sealant to set properly.

Once the sealant is cured, test your window's operation to ensure it opens and closes smoothly. Wipe away any excess sealant from the frame, and you're done! You've successfully replaced the glass in your double pane vinyl window.

AD